When metal strikes a hard surface, it can create a variety of outcomes depending on the force and angle of impact. The metal may deform, creating dents or scratches, and can produce sparks due to friction and heat generated at the point of contact. If the impact is strong enough, it can cause the metal to fracture or break. Additionally, the sound produced is often a sharp, ringing noise due to the high-frequency vibrations generated from the collision.
yes and no the hardsolis is not iportant and the shape is yes
Yes, metal is a soild because because metal is made out of steel or other objects that are hard.. because all the objects to MAKE METAL are hard so will metal.
The technique that compresses the surface of clay to make it watertight and gives it a sheen is called burnishing. This process involves rubbing the surface of the leather-hard clay with a smooth, hard tool, such as a stone or a metal burnisher, which compacts the clay particles and creates a polished finish. Burnishing not only enhances the aesthetic quality of the pottery but also increases its durability and resistance to moisture.
The combination of a hard surface and a soft interior is greatly valued in modern metal engineering because it offers very high stress and fatigue for applications such as gears and anti-friction bearings. Surface-hardened steel is also valued for its low cost and superior flexibility in manufacturing.
Yes, rhodium is a hard and durable metal. It is known for its high hardness and resistance to corrosion, making it a popular choice for jewelry and industrial applications.
i thing it produces sound?
They are either absorbed [softsurface, e.g. wool] or refected [hard surface, e.g. metal]
you go on strike because you dont deserve that if you know you are working very hard.
When a wave hits a hard surface, it reflects off the surface. The angle of reflection is equal to the angle of incidence. Some energy may also be absorbed by the surface, causing it to vibrate.
The fresh surface of pure iron is silver-white.
A metal spoon typically makes a clinking or tinkling sound when it hits a hard surface like glass or ceramic.
Yes, a bullet can be reflected by a hard surface such as metal or concrete, depending on the angle of impact and the surface's hardness. However, the bullet's velocity might decrease after reflection due to energy loss upon impact.
(The Quote came from the 1984 movie "Karate Kid" and the actual quote was "Strike First Strike Hard Show No Mercy".) This quote is accually said by Fleet Admiral William Halsey, during WWII, the "Karate Kid" quote is probably derived from what the Admiral said. and it's: "Strike Fast, Strike Hard, Strike Often".
To make a coin, you take 2 pieces of hard metal (usually steel) and engrave a reverse image of what you want the coin to look like on these pieces of metal. This is called the die. You then put the metal between the 2 dies and apply pressure to strike the coin. Ancient and medieval coins used a hammer to strike the coin (often multiple strikes were required) but modern methods use machines to strike the coin and usually only one strike is required except in high-relief and proof coins.
hard
Hard anodizing: electrolytic passivization of the metallic surface with the scope to obtain an oxide layer with a hardness greater than the hardness of the metal. Frequently used for aluminium.
yes and no the hardsolis is not iportant and the shape is yes