0
When oil is poured into a u-tube test tube of water, the oil will separate from the water due to their difference in density. The oil, being less dense, will float on top of the water, creating two distinct layers. This is because oil is hydrophobic and does not mix with water.
What else can I help you with?
What happens when you blow over the mouth of a test tube which is half filled with water?
Blowing over the mouth of the test tube will create a decrease in air pressure inside the tube. This decrease in pressure will cause the water in the test tube to rise up due to the higher pressure outside the tube. Ultimately, the water level in the test tube will rise as a result of the change in pressure.
What happens to the water in the small tube as the water in the test tube absorbs heat?
As the water in the test tube absorbs heat, its temperature increases, causing it to expand. This expansion can create a pressure difference that may cause the water in the small tube to either rise or flow, depending on the setup. If the small tube is connected to the test tube, the heated water may push some of the water in the small tube upward, demonstrating the effect of thermal expansion.
What happens when the smoke touches the cold water test tube?
When smoke touches cold water in a test tube, it cools down rapidly, causing the smoke particles and gases to condense and form a visible cloud. This cloud is the result of the water vapor in the smoke condensing into tiny water droplets, making the smoke more visible.
What happens if you use a luminous flame to boil water in a test tube?
Using a luminous flame to boil water in a test tube can lead to incomplete combustion, resulting in the formation of soot or carbon particles that may contaminate the water. It may also affect the purity of the water due to the combustion products in the flame. It is recommended to use a clean, blue flame for heating applications in the laboratory to avoid this issue.
What happens when iron nails are dipped in water in a test tube for a week?
If iron nails are dipped in water in a test tube for a week, they are likely to undergo a chemical reaction known as rusting, where they react with oxygen and water to form iron oxide. This process weakens the iron nails and causes them to corrode and become covered with a reddish-brown layer.
If you put marbles in the water what happens?
It either floats or sinks...put the marbles in water to test them!
How find out if there is air in water?
One way to find out if there is air in water is to observe bubbles rising to the surface. Another method is to listen for a sound when water is being poured, as air may create a bubbling or gurgling noise. Additionally, you can test for air by performing a water displacement test using a submerged object in the water.
what is the best home test to check if a metal is gold Is the water test a good test for gold if it sinks?
if the metal sinks in water is is proof it is gold
What type of test is required for welder performance qualification?
bend test visual examination radiographic test all of the above
What happens when the test tube containing the green pigment is placed in boiling water?
It all depends on what is in the test tube and just what kind of green pigment.
What happens to the level of water in a test-tube as hydrogen is produced?
Ya... In a test tube add some aluminum foils and some amount of NaOH... Introduce the flame near mouth of the test tube... Then see the magic...
Would tap water poured into your urine cover up a drug test?
No, pouring tap water into your urine will not cover up a drug test. Drug tests are designed to detect specific substances in urine, and adding water will dilute the sample but is likely to be detected by the testing process.
When freshly poured out of a bottle which creates more fizz diet or regular soda?
the only way to find out test it .
What happens when you test positive for fioricet?
You fail the test.
What happens when you blow over the mouth of a test tube which is half filled with water?
Blowing over the mouth of the test tube will create a decrease in air pressure inside the tube. This decrease in pressure will cause the water in the test tube to rise up due to the higher pressure outside the tube. Ultimately, the water level in the test tube will rise as a result of the change in pressure.
What happens if a potato tubule is placed in a test tube with water?
sprouts will grow from the potato tubule and grow more potatoes..... weird huh?
What happens to the water in the small tube as the water in the test tube absorbs heat?
As the water in the test tube absorbs heat, its temperature increases, causing it to expand. This expansion can create a pressure difference that may cause the water in the small tube to either rise or flow, depending on the setup. If the small tube is connected to the test tube, the heated water may push some of the water in the small tube upward, demonstrating the effect of thermal expansion.
