0
What else can I help you with?
Why was Brahes work helpful even though his theory of the universe was incorrect?
This is because he explained the sun's role in the universe!
What happens when cicuit breakers ae exposed to sunlight?
Nothing happens when circuit breakers are exposed to sunlight. They still work just as they are supposed to work.
What causes electrical work?
It happens after someone asks for it to be done for some reason.
When selecting an iv site you work distal to proximal?
Incorrect. When selecting an IV site, you typically start proximally (closer to the heart) and work distally (further away from the heart) for better flow and to preserve veins for future use.
What are the task of a chemistry?
To see what happens when chemicals are mixed together and also work out equations
What is datum in land survey?
A land survey datum (plural datums) is a reference from which measurements are made. The reference in the form of a set of coodinate and a direction. The datum can be arbitary (assumed) or absolute. The arbitary datum point is a point whose coordinate and direction are not known, so an arbitary value is adopted. All other coodinates of the survey project are connected together, but its datum point is not connected to a larger network. The absolute datum is a reference point whose coordinate and direction are already known within a frame of network. So the new survey become part of the network.
What happens if WikiAnswers gives the wrong answers?
Sadly, there is no way of stopping incorrect answers from being added to the site. The only thing we can do is remove them and work on another, correct answer.
What happens when a parent looses trust in a relationship?
They either work together to rebuild or a split is inevitable at some point.
Why is he correct Quote of the day?
Thinking is the hardest work why is he correct and incorrect
What you do to a hypothesis docent NT work?
say that your hypothesis is incorrect in your conclusion
Why is it important to use a fixed common reference point for dimensioning of drawings and sketches?
It is important to use a fixed common reference point on your work peace or drawing to avoid cumulative error, i.e. if a hole is drilled using an incorrect measurement initially, then continuation to measure from the error instead of using a common reference point could result in a whole piece of work being scrapped. Also if somebody has to take over the work, they would need to understand were the dimensions were taken from to enable them to carry on with the work.
What happens if your grammar was incorrect?
If your grammar was wrong, you would receive a lower grade on class work. You would not be considered for certain jobs. You would be turned down by certain schools. For some jobs, it would not matter.
What are the advantages of using the point rather than typing the cell location directly into the formula?
Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.Sometimes it is quicker. It also ensures that the right cell is chosen, as sometimes an incorrect cell reference may be typed. A person does not have to try to work out the cell reference.
EXPLAIN HOW TO SET MACHINE DATUMS FOR EACH OF THE MACHINE AXIS BEING USED?
Our machine datum is referred to as G53 and the working datums are the datums around the part that we can select that we can make all our dimension's stem from, them being X0 Y0 and Z0, we can refer to them using G54, G55, G56, G57, G58 and G59. If these are not enough to refer to you can add more such as G54.1 or G54.5. You will always sate what datum you are using at the start of each programming sequence so the machine knows what datum to use for each tool/process. There are several methods that you can set the work shift offset. The common method we use at Albany is to put the machine into manual mode (MDI) and take a small cut on the Z and X axis. Then go to work shift offsets by pressing the offset function key twice then select work offsets. Set the axis to zero which will then record the work shift offset. To allow the reading of the offsets we must use a G10 code within the program it will read the distance between the machine datum (G53) to our working datum (G54, G55, G56, G57, G58, G59), setting the work shift value. It will also include an L2 command that will set the standard work offsets. Following from this line off code we would copy the co-ordinates recorded in the work shift offset page. (SUPPORT ANSWER WITH IMAGES)
How does the dmv point system work?
How does the DMV point system work
Why is the question 'What dose he like to do after work' incorrect?
Dose is the measured amount of a medication. Does is a verb. The question should be, "What does he like to do after work?"
What are two example sentences for the plural of datum?
The plural of datum is data, of course.Data show that many students cheat on their homework.Once the teacher studied the test data, it was obvious that nobody had done their work.
