watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
To calculate the amps, you can use the formula: Amps = Watts / Volts. So, for 2000 watts and 110 volts, 2000 watts / 110 volts equals approximately 18.18 amps.
To calculate the amperage, you would need to know the voltage of the system. If you assume a standard voltage of 120V, you can calculate the amperage by dividing the wattage by the voltage: 2000 watts / 120 volts = 16.67 amps.
Amps * Volts = Watts So, Watts / Volts = Amps 2000 / 240 = 8.333 Amps You should run the circuit on a two pole 15 Amp breaker, using 14 AWG, 2 conductor (plus ground) wire, just so you have a little safety factor in the circuit size.
The formula you are looking for is I = sq root of W/R.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
To calculate the amps, you can use the formula: Amps = Watts / Volts. So, for 2000 watts and 110 volts, 2000 watts / 110 volts equals approximately 18.18 amps.
To calculate the amperage, you would need to know the voltage of the system. If you assume a standard voltage of 120V, you can calculate the amperage by dividing the wattage by the voltage: 2000 watts / 120 volts = 16.67 amps.
Yes it should, check the output amps/watts against the amps/watts your polisher uses. presto, if they are close just start the polisher and watch the load you put upon it. If you work it too hard you will pop the circuit breaker and need to reset.
depends on voltage.... 120volt = 8.33 amps , 240volt = 4.17 amps
Watts = Amps x Volts. This is the same as VA. So 2KVA is equal to 2000 watts.
Amps * Volts = Watts So, Watts / Volts = Amps 2000 / 240 = 8.333 Amps You should run the circuit on a two pole 15 Amp breaker, using 14 AWG, 2 conductor (plus ground) wire, just so you have a little safety factor in the circuit size.
"2kw fire" if this refers to an electric fireplace then you also need to know the voltage that is used. 1Kw = 1000 watts. Watts = Amps x Volts. Amps = Watts/ Volts. Amps = 2000/Volts.
Current (amps)=Watts/Volts =2000/120 =16.75 =16.75 amps
The formula you are looking for is I = sq root of W/R.
Watts = Amps * Volts Watts = 20 amps * 100 Volts Watts = 2000 2,000 Watts or 2k Watts
Watts = Amps * Volts Watts = 20 amps * 100 Volts Watts = 2000 2,000 Watts or 2k Watts