To convert pressure in Psi (pounds per square inch) to flow rate in CFH (cubic feet per hour), additional information is needed, such as the specific gas being measured and the size of the orifice or pipe through which the gas flows. Flow rates are influenced by factors like temperature, pressure, and the geometry of the system. Without these details, a direct conversion from Psi to CFH cannot be accurately performed.
There are 36,000 cfh (cubic feet per hour) in 36 mbh (thousand British thermal units per hour).
Converting CFH to CCF is hard, and there are several online converters to improve this operation. However, the general rule of thumb for conversion is: 1 Therms (u's) to Cubic Feet Of Natural Gas = 99.9761.
28,2 [psi ] = 28,2 [pounds / square inch ] = 28,2 [ lbf /in^2] Definition 1 inch = 25,4 * 10^-3 m (metre) 28,2 [pounds / in^2] / 25,4^2 * 10^-6 [ in ^2 / m^2] = 0,04371 * 10 ^6 [pounds /m^2] Definition: 1 pound = 0,453 592 37 kg 28,2 psi = 0,04371 * 10^6 [pounds /m^2] *0,453 592 37 [kg / pound] 28,2 psi = 0,0198 * 10^6 [kg / m^2] 1 kgf = 1kg * g [m/s^2] = 1[kg]* 9,81 [m*s^-2] = 9,81N 28,2 psi = 0,0198 * 10^6 [kg / m^2] * 9,81 [N / kgf] = 0,194*10^6 [N / m²] = 194.000 Pa Definition: 1 Pa = 1 N / m² 1kPa = 1000 Pa 28,2 psi = 194 kPa shorter 1 psi = 6,89476 kPa 28,2 psi = 28,2 [psi] * 6,89476 [kPa/psi] = 194,43 kPa Roger.
To convert from cubic feet per hour (cfh) to gallons per hour of propane use, you need to know the specific gravity of propane, which is around 0.507. Then, you can use the conversion factor of 1 gallon of propane = 36.39 cubic feet. Divide the cfh by the specific gravity of propane and then divide by 36.39 to get the gallons per hour.
about 2 PSI
To convert CFH to BTU, you need to use the formula 1 CFH which is equivalent to 1000 BTUs.
1 cfh = 1 mbh
There are 36,000 cfh (cubic feet per hour) in 36 mbh (thousand British thermal units per hour).
1
To convert cubic feet per hour (CFH) to British Thermal Units (BTU), you need to know the type of gas being measured, as different gases have different heating values. For natural gas, 1 CFH is approximately equivalent to 1,000 BTU. Therefore, 450 CFH of natural gas would equal about 450,000 BTU per hour. If using propane, the conversion would be different, typically around 2,500 BTU per CFH.
A short answer is this is like converting apples to oranges! They measure different things! However having made literally thousands of tests of pressure and flow for MIG welding when inventing our patented Gas Saver System this may help define the difference. It takes about 3 to 8 psi in the gas hose attached to the welder/wire feeder to flow 30 to 35 CFH! However, it will vary while welding as the small gas hose in the MIG gun cable is bent, as spatter builds in the gun nozzle and for other reasons! That is why all proper regulator/flowmeters or regulator/flowgaugues (those with 2 gauges, one calibrated in CFH) operate above 25 psi. It is called choked flow. The needle valve or very small orifice (typically 0.025 inches)in a regulator/flowgauge operates above 25 psi to achieve what is called "automatic flow compensation." The folks developing MIG and TIG in the 1950's knew about flow variations and used this flow control approach. It relies on the fact that gas flow in a small hole or needle valve cannot exceed the speed of sound. That is why you see lightening before you hear the thunder! Use the proper regulator/flowmeter or regulator/flowgauge. If you want to improve, your weld starts and reduce gas waste and surge, see www.NetWelding.com. Unlike low-pressure devices some have tried and found vary gas flow our simple inexpensive system maintains "automatic flow compensation." Sorry for the long answer!
1 bar is 14.7 psi
Converting CFH to CCF is hard, and there are several online converters to improve this operation. However, the general rule of thumb for conversion is: 1 Therms (u's) to Cubic Feet Of Natural Gas = 99.9761.
CFH is complement factor H. CFC is chlorofuorocarbons.
cubic feet per hour
MCFH (thousand cubic feet per hour) and CFH (cubic feet per hour) are both units of measurement for gas flow rates. The primary difference lies in their scale: MCFH represents flow in thousands of cubic feet, while CFH represents flow in single cubic feet. Therefore, 1 MCFH is equal to 1,000 CFH. This distinction is important for understanding and comparing gas flow rates in various applications.
75 psi range