No: CFM is Cubic Feet per Minute, which is a flow rate (volume/time). PSI is Pounds per Square Inch, which is a pressure measurement (force/area).
However, for certain situations with known substances moving in a known piping, there may be tables available which at a certain pressure, the the substance will move through the pipe at a certain rate. These would be very specific situations and not a general conversion, though.
To convert from torr to psi, divide by 51.715. Therefore, 752 torr is approximately 14.55 psi when rounded to two decimal places.
To convert 0.50 MPa to psi, you can use the conversion factor: 1 MPa is approximately equal to 145.038 psi. Therefore, 0.50 MPa is approximately equal to 72.519 psi.
To convert a pressure value from pascal to psi, you can use the conversion factor of 1 pascal is equal to 0.00014503773773 psi. Simply multiply the pressure value in pascal by this conversion factor to get the equivalent value in psi.
50 psig is equivalent to 64.7 psi. To convert psig to psi, you simply add the atmospheric pressure at sea level, which is about 14.7 psi.
To convert psi to Torr, you can use the conversion factor: 1 psi is approximately equal to 51.715 Torr. Therefore, to convert 102.872 psi to Torr, you would multiply by this conversion factor to get approximately 5332.73 Torr.
To convert CFH to BTU, you need to use the formula 1 CFH which is equivalent to 1000 BTUs.
To convert pressure in Psi (pounds per square inch) to flow rate in CFH (cubic feet per hour), additional information is needed, such as the specific gas being measured and the size of the orifice or pipe through which the gas flows. Flow rates are influenced by factors like temperature, pressure, and the geometry of the system. Without these details, a direct conversion from Psi to CFH cannot be accurately performed.
1 cfh = 1 mbh
To convert Cubic Feet to Btu's, multiply by 1,000 1 CF = 1,000 Btu's
Converting CFH to CCF is hard, and there are several online converters to improve this operation. However, the general rule of thumb for conversion is: 1 Therms (u's) to Cubic Feet Of Natural Gas = 99.9761.
To convert BTU (British Thermal Units) to CFH (Cubic Feet per Hour), you need to know the specific energy content of the gas you're using, usually measured in BTU per cubic foot. The formula is: CFH = BTU / (BTU per cubic foot). For example, if the gas has an energy content of 1,000 BTU per cubic foot, then 10,000 BTU would convert to 10 CFH. Always ensure to use the correct energy content for accurate conversion.
Multiply psi x 0.07 to get atmospheres.
To convert PN25 to PSI, you can use the conversion factor where 1 PN (Pressure Nominal) is equivalent to approximately 145 PSI. Therefore, to convert PN25 to PSI, multiply 25 by 145. This results in approximately 3625 PSI.
To convert cubic feet per hour (CFH) to British Thermal Units (BTU), you need to know the type of gas being measured, as different gases have different heating values. For natural gas, 1 CFH is approximately equivalent to 1,000 BTU. Therefore, 450 CFH of natural gas would equal about 450,000 BTU per hour. If using propane, the conversion would be different, typically around 2,500 BTU per CFH.
To convert pressure from mmHg to psi, you can use the conversion factor where 1 mmHg is approximately equal to 0.0193368 psi. Therefore, to convert 235 mmHg to psi, you multiply 235 by 0.0193368, resulting in approximately 4.54 psi.
1 bar = 14.5 PSI
To convert 14.73 psi to 15.025 psi, you need to increase the pressure by the difference between the two values. Subtract 14.73 from 15.025, which gives you 0.295 psi. Therefore, you can achieve the conversion by adding 0.295 psi to 14.73 psi, resulting in 15.025 psi.