answersLogoWhite

0

4 amps is a unit of electric current that measures the rate of flow of electric charge. It is equivalent to 4 coulombs of charge passing through a point in a circuit per second. Amps are commonly used to measure the strength of an electric current in a circuit.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

4 volts is a many watts?

4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.


What is the max amps for a 4 gauge wire can 4 gauge feed a 100A breaker box?

Yes, # 4 AWG copper and 100 amps is the max.


How many amps can 4 ought aluminum wire carry?

Aluminum 4/0 wire car carry 180 amps at at 75 degrees Fahrenheit or 205 amps at 90 degrees. .


How many amps does a microwave draw?

1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan


What is 4ah in battery terms?

Ah means Ampere hours. A 4 Ah battery can release 4 amps for one hour, or 1 amp for 4 hours, or 0.5 amps for 8 hours, or 8 amps for 0.5 hours.


How many amps will 2-2-2-4 carry at 180 feet?

150 amps


What voltage is applied to a 4 ohm resistor if the current is 1.5 amps?

Ohm's law: Volts = amps times ohms In the case of a 4 ohm resistor with 1.5 amps of current, the voltage is 6 volts.


How many Amps is number 4 THHN copper rated for?

According to the National Electrical Code (NEC), the ampacity of a 4 AWG THHN copper wire at 75°C is 85 amps, and 95 amps at 90°C.


How many watts in a 115 volt refrigerator?

How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.


How many amps do 48watt LED 12 volt lights draw?

To calculate the current draw in amps for a 48-watt LED light at 12 volts, you can use the formula: Amps = Watts / Volts. So, 48 watts / 12 volts equals 4 amps. Therefore, a 48-watt LED light at 12 volts draws 4 amps.


A 220 volt motor is rated at 4.0 amps is that 4.0 amps per leg or 2.0 amps per each leg?

The Full Load Amps, FLA is a rating for each winding of the motor. In this case the motor actually needs 4 amps running through it. As current needs to go somewhere (perferably not to ground) the 4 amps will circulate on you 2 Hots, the neutral isn't needed. 4A in, 4A out.


How many watts is equal to 4.3 amps at 230 volts?

In normal simple circuits WATTS = VOLTS x AMPS So if you use a 12V car battery 4 amps is 48 Watts American 110V mains 4 amps = 440 Watts English 240V mains 4 amps = 960 Watts