What is Polymer concrete?
It is also known as resin concrete because synthetic resins are used instead of cement in its manufacturing.
Density of cement concreteDensity of polymer concrete
Plastic bags are typically manufactured from high density polypropylene (HDPE - plastic number 2) or low density polypropylene.
Monomer density of a polymer refers to the concentration of monomer units within the polymer structure, typically expressed in terms of moles per unit volume. It gives insight into how densely packed the repeating units are within the polymer, which can influence the material's mechanical and thermal properties. Higher monomer density often correlates with increased rigidity and strength, while lower density may result in more flexible and elastic characteristics. Understanding monomer density is crucial in polymer chemistry for tailoring materials for specific applications.
High-density polyethylene (HDPE) is a thermoplastic polymer known for its high strength-to-density ratio, chemical resistance, and ease of processing. It is commonly used in a wide range of applications including bottles, pipes, and packaging due to its durability and recyclability. HDPE has a melting point range of 120-180°C and a density of around 0.95 g/cm³.
Crosslink density refers to the number of chemical bonds connecting polymer chains in a network structure. A higher crosslink density results in a more compact and rigid polymer structure, leading to increased mechanical strength and resistance to solvents. This property is important in determining the physical and mechanical properties of a polymer material.
Normal concrete has a density around 2400 kg/cubic meter or 4048 lb/cubic yard. There are many different kinds of concrete, many of which are much lighter. Cement is the liquid (or paste like) form, and tends to be much heavier than when it has cured into concrete. "Cement" is not concrete, but can be used to make concrete by mixing with sand, stone and water. The density of cement is about 3120kg/m3.
High Density PolyEthylene. A polymer/plastic.
Plastic bags are typically manufactured from high density polypropylene (HDPE - plastic number 2) or low density polypropylene.
Density of normal concrete is in the order of about 2400 kg. per cubic metre. The densityof light-weight concrete will be less than about density 1900 kg per cubic metre.The high density concrete have unit weight ranging from about 3360 kg percubic metre to 3840 kg per cubic metre.
High density concreteSulphur infiltrated concreteVacuum concreteHeavy weight concreteLight weight concreteNo fines concrete
higher crystallinity in a polymer = lower density
Polymer concrete is a composite material which results from polymerization of a monomer/aggregate mixture. The resulting polymer binds the aggregate making the concrete stronger than ordinary concrete using just standard aggregate.
Dry concrete has a greater density than wet concrete because the water content in wet concrete decreases its overall density. When the water in wet concrete evaporates during the curing process, the concrete becomes denser.
Density of M30 and any fresh concrete is 2400kg/cu.m and reinforced concrete density you can take 2500 kg/cu.m
The fraction of a piece of concrete submerged in water depends on its density compared to the density of the water. If the density of the concrete is greater than the density of water, the fraction submerged will be less than 1. If the density of the concrete is less than the density of water, the entire piece of concrete will be submerged.
silica fume and quartz powder is added to make the concrete more denser. fine aggregates fill the voids between coarse aggegates, cement fill the voids between fine aggregate, silica fume fills the voids between cement and quartz powder fills the voids in between silica fumes
The density of concrete can vary from 2,300 to 3,400 kg/m3.
Monomer density of a polymer refers to the concentration of monomer units within the polymer structure, typically expressed in terms of moles per unit volume. It gives insight into how densely packed the repeating units are within the polymer, which can influence the material's mechanical and thermal properties. Higher monomer density often correlates with increased rigidity and strength, while lower density may result in more flexible and elastic characteristics. Understanding monomer density is crucial in polymer chemistry for tailoring materials for specific applications.