answersLogoWhite

0

A FireWire connector is a type of data transfer port used to connect high-speed external devices such as cameras, hard drives, and audio interfaces to a computer. It was popular in the early 2000s but has largely been replaced by newer connection standards like USB and Thunderbolt.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

Where is the neutral wire on a nema 6 20r connector?

The NEMA 6-20R is a 2 pole 3 wire grounding receptacle that is rated for 250 volts. It is not meant to have a neutral wire connected to it. The receptacle is designed to have 240 volts connected to it.


How do you join stranded and solid wire in electrical wiring applications?

Depending on the size of the wire, you can use wire-nuts for the smaller gauges Do not twist solid and stranded wire together when you use wire-nuts. Just lay the exposed conductor side by side and apply the wire-nut. If you wrap the two wires together, it was found, some connections have pulled apart due to the wire-nut not biting into the solid wire as the stranded wire was wrapped around it. Split bolts for the larger sizes and Allen key wire lugs bolted together for big size wire.


Can BX connectors be used with romex wire?

They can as they will support the wire into the box. The deciding factor should be the cost. A BX connector costs about four times the price of a romex connector. Also to keep in mind is that most junction boxes these days have their own built in clamps.


How to butt splice the two wires?

Place the power wire into the connector.Place the other wire into the connector.Take a pair of pliers and clamp down onto the connector. This will splice them together.An instructional video has also been included below.


How do you use a wire terminal removal tool?

To use a wire terminal removal tool, you insert it into the connector housing until it latches onto the terminal you want to remove. Then, gently pull the tool and the terminal out of the connector housing. Be sure to follow the specific instructions that come with your particular removal tool for best results.

Related Questions

How can I remove a wire from a push-in connector?

To remove a wire from a push-in connector, gently push down on the release tab while pulling the wire out of the connector. Be careful not to damage the wire or the connector during this process.


Where is the timing connector wire to set the ignition timing on a 1992 Chevy 350 truck?

it is behind the black cover on the fire wall passenger side top it is a one wire connector protruding throught the wiring harness and taped to it. it has one wire tan with black tracer. hope this helps


How can I remove a wire from a connector?

To remove a wire from a connector, you can use a small tool like a pin or a paperclip to press down on the tab or latch that is holding the wire in place. Once the tab is pressed down, gently pull the wire out of the connector. Be careful not to damage the wire or the connector during this process.


How do you disconnect cruise control on 2001 ford expedition?

you can pull the two wire connector on the front of the master cylinder. this will dsable the cruise control. there is also a recall (fire hazard) on that connector as well.


How can I remove wires from a push-in connector?

To remove wires from a push-in connector, gently push down on the release tab while pulling the wire out of the connector. Be careful not to damage the wire or the connector during this process.


96 contour has no spark why?

Check the crankshaft position wire connector and wire.


How does the push-in wire connector work in electrical installations?

The push-in wire connector works by allowing wires to be inserted into the connector without the need for twisting or screwing. The connector has spring-loaded slots that grip the wires securely, creating a reliable electrical connection.


How can I remove wires from a plastic connector?

To remove wires from a plastic connector, you can use a small tool like a pin or a paperclip to press down on the tab inside the connector while gently pulling the wire out. Be careful not to damage the connector or the wire while doing this.


How can I effectively crimp spade connectors?

To effectively crimp spade connectors, follow these steps: Strip the wire insulation to expose the bare wire. Insert the wire into the spade connector. Use a crimping tool to squeeze the connector onto the wire securely. Ensure a tight connection by testing the crimped connector for any movement.


Current needs to flow through a connector such as?

wire


99 venture van quits you shake fuel pump connector and it starts?

Bad wire or connector Loose or corroded Replace connector


Why your brake lights don't work on your 2002 Suzuki esteem?

I had this problem on my 1998 Suzuki Esteem and it was the connector under the dash near the steering wheel. The wire going to the brake light was bad inside the connector. I had to tear it apart and fix the connector right where the wire was inserted into the connector, it had turned brown and mostly melted. I repaired the wire going into the connector and all is back to normal working operation.