0
What else can I help you with?
What is the hole in the rubber stopper for?
The hole in a rubber stopper is used to allow for the insertion of glass tubing or a thermometer into a container without disrupting the seal created by the stopper. This allows for measurements or additions to be made to the container while maintaining a closed system.
When magnesium reacts quickly with hydrochloric acis to produce hydrogen gas in a glass tube with a rubber stopper why would the rubber stopper burst of?
The reaction between magnesium and hydrochloric acid produces hydrogen gas, which builds up pressure inside the closed glass tube. If the pressure exceeds the strength of the rubber stopper, it will burst off to release the built-up pressure and prevent the glass tube from breaking due to the increased pressure.
Why are the tubes sealed with rubber stopper rather than left open?
To avoid loss of substances.
What happens to the number of revolutions of a rubber stopper as the radius of rotation decreases?
As the radius of rotation decreases, the number of revolutions of a rubber stopper increases. This is due to the conservation of angular momentum - with a smaller radius, the rotational speed must increase to maintain the same angular momentum.
What are the laboratory apparatus of rubber plug?
The main reason for a rubber stopper is to stop gas or liquid from coming out of the container. Rubber stoppers can also prevent contamination of samples by keeping the laboratory glassware safe.
Where can you buy a rubber stopper?
You can buy an rubber stopper at widget-co.com. They are not that expansive ethier
What is the volume of rubber stopper?
The volume of a rubber stopper can vary depending on its size and shape. To find the volume of a rubber stopper, you can use the formula for the volume of a cylinder or sphere, depending on the shape of the stopper. Measure the dimensions of the stopper and plug them into the appropriate formula to calculate the volume.
Would a rubber stopper float in water?
i don't know... That's why I'm asking you. soo.. Does a rubber stopper float in water?
Is the density of rubber stopper is denser than the density of water?
No, the density of a rubber stopper is less than the density of water. Rubber has a lower density compared to water, so a rubber stopper would float on water.
When a rubber stopper has a mass of 8.46g was immersed in a graduated cylinder containing 25 ml of water the water rose to 30.9 ml Calculate the densityof the rubber stopper?
The volume of the stopper can be calculated by subtracting the initial volume of the water from the final volume. In this case, the volume of the rubber stopper would be 30.9 ml - 25 ml = 5.9 ml. Now, divide the mass of the rubber stopper (8.46 g) by its volume (5.9 ml) to find its density. Density = Mass/Volume, so the density of the rubber stopper would be 8.46g / 5.9ml = 1.43 g/ml.
What is the average life expectancy of a rubber stopper?
This is very variable and depends on: - type of rubber - temperature - pressure on the stopper - the liquid in contact - other conditions of use
What is the use of rubber stopper in laboratory apparatus?
pantakip.
What is the use of rubber stopper's laboratory apparatus?
pantakip.
How do you replace rubber brake stopper on a 2001 Nissan Xterra?
remove the pedal arm pin so that you can freely move the pedal and have an access to the rubber stopper slots.
Why must KClO3-MnO2 mixture be kept away from rubber stopper?
KCIO3-MNO2 cannot comes in contact with the rubber stopper otherwise, or a severe explosion may result.
Where can you get a cork or rubber stopper for science experiment in Karachi Pakistan?
Well! you can find ruuber stopper from Lahore. There is a compant which is the biggest manufacturer in all types of Polyvinyal & Rubber Stopper. here is the company address:- Dawn Rubber 1- Bull Road Lahore Telephone Number is :- 0092-42-7659406
I have a beautiful glass globe hummingbird feeder that has a rubber stopper. How can I stop the nectar from leaking out of the stopper?
If there is debris on the stopper it might be preventing a good seal. Try removing the rubber stopper and wipe it off to remove any debris that might be on it. Clean out the hole that the stopper goes into as well. This will help ensure a clean seal between the hole and the stopper. Put the stopper back into the hole, making sure it is a tight fit. If it still leaks you may need to buy a new stopper.
