0
Steam turbine is comprising of stages, number and size of the stages depands upon the break horse power of the turbine.
The stage has set of moving and fixed blades. The moving blades are attached to the rotor while the stationary blades is called Diaphragm.
The diaphragm guides the steam to glide over the moving blades for producing rotary motion.
What else can I help you with?
How does steam turbine works?
Steam or water, it works the reverse of a fan, where the fan pushes air down, the turbine is turned by the steam or water. there's a shaft leading from the turbine to the generator, which produces the electricity
How does nuclear fission spin a turbine?
Nuclear fission generates heat which is used to produce steam. The high-pressure steam spins a turbine by expanding through its blades. The turbine is connected to a generator, which converts the kinetic energy from the spinning turbine into electricity.
Does the volume increase in each turbine stage?
The volume increases in each turbine stage as the expanding steam passes through the turbine blades. This expansion of steam causes an increase in volume and a corresponding decrease in pressure and temperature.
Where does the kinetic energy come from in the turbine?
The kinetic energy in a turbine comes from the movement of a fluid (such as wind, water, or steam) that flows through the turbine's blades. As the fluid moves, it transfers its kinetic energy to the turbine's rotor, causing it to spin and generate mechanical energy that is then converted into electricity.
How much does a small steam turbine cost?
Small steam turbines can range in price from $5,000 to $50,000 depending on the size, capacity, and manufacturer. Additional costs for installation, maintenance, and accessories should also be taken into consideration when budgeting for a small steam turbine system.
Why LP turbine diaphragm breaks?
Lp turbine diaphragm breaks due to positive pressure inside the condenser because of steam expansion.
Why extraction taken from steam turbine?
Why extractions are taken out from steam turbine.
Why would you not heat the steam coming out of turbine and feedback to turbine?
Steam is redirected back into the boiler from the high-pressure turbine for reheating, but the steam from the low-pressure turbine enters into a condenser to become water again.
What are the preventive maintenance of steam turbine?
The preventive maintenance of steam turbine mainly entails frequent servicing of the parts. This will ensure a smooth performance of the steam turbine.
What is heat rate of steam turbine How to calculate heat rate of steam turbine?
manish
What type of cycle used in steam turbine?
Rankine cycle is used in steam turbine
Why you are maintain the vacuum in steam turbine explain me briefly?
why we are maintain vacuum in steam turbine at steam outlet or exhaust side
Nozzle clearance how to steam turbine?
Steam turbine nozzle clearance is the total energy content available in steam. This is through a valve.
What causes steam turbine governor hunting?
inconsistent load will cause steam turbine hunting.
What is positive axial displacement of steam turbine?
axial shift of a steam turbine is the shifting of turbine rotor in the forward and backward direction due to steam thrust on blades of rotor.
How TO generate electricity from steam?
To generate electricity from steam, a steam turbine is typically used. High-pressure steam is directed onto the turbine blades, causing the turbine to spin. The spinning turbine is connected to a generator, which converts the mechanical energy into electrical energy.
How does steam turbine works?
Steam or water, it works the reverse of a fan, where the fan pushes air down, the turbine is turned by the steam or water. there's a shaft leading from the turbine to the generator, which produces the electricity
