answersLogoWhite

0

To determine the cable size in mm2 required for 450 amps, you need to consider the current-carrying capacity of the cable. The exact size will depend on the type of cable and the installation conditions. For 450 amps, heavy-duty cables with a size of around 240 mm2 or larger would typically be used to ensure safe and efficient operation.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

What size is a motor that reads 4.8 amps on a juicer?

If it's 120 v 4.8 amps that is about 450 watts.


What cold cranking amps does a ford transit 2.5 require?

The cold cranking amps that are required to start your Ford 2.5 liter engine is dependent upon the outside temperature. 450 cranking amps are required at a temperature of 32 degrees.


How much current does 300 sq mm cable carry?

A 228 sq mm conductor equates to 450 MCM. A conductor of 450 MCM is not a standard AWG wire size. A standard 400 MCM will carry 380 amps. A standard 500 MCM will carry 430 amps. Difference between 400 and 500 MCM amperage's is 50 amps. Transposing between the two amperage's of 50 amps will be 380 + 25 = 405 or 430 - 25 = 405 amps. This is a very rough calculated answer for the question.


How many amps is 450 watts?

450 watts divided by 120 volts equals 3.75 amps450 watts divided by 12 volts equals 37.5 ampswatts divided by volts equals amps


How do you replace choke cable in ATV Honda Foreman 450?

how do you replace a choke cable on a 2001 Honda 450 foreman


Can a home have 450 volts in it and how much amps do you need for this many volts?

Homes do not normally have a 450 v supply and domestic equipment can not be bought for 450 v. For any voltage the current in amps equals the power in watts divided by the votage (and an extra allowance for power factor).


How many amp is 450 watts 24 volts?

That gives you 18.5 amps.


What size conductors to use for a 400 amp circuit?

A 500 MCM copper conductor with an insulation factor of 90 degrees C is rated at 430 amps. Parallel 3/0 copper conductors with an insulation factor of 90 degrees C will give a total capacity of 450 amps.


How deep do you bury 120v wire?

Minimum coverage for non vehicular areas; for conductors or cable not having a metal sheath or armour, under 750 volts, the required depth is 600 mm. For conductors or cable having a metal sheath or armour, under 750 volts, the required depth is 450 mm. Minimum coverage for vehicular areas; for conductors or cable not having a metal sheath or armour, under 750 volts, the required depth is 900 mm. For conductors or cable having a metal sheath or armour, under 750 volts, the required depth is 600 mm.


What is the resistance of 450 watts 120 volt heater?

First find the current, I = W/E, 450/120 = 3.75 amps. R = E/I, 120/3.75 = 32 ohms.


5cm is to 4.5m in fraction?

It is 5/450, which can be simplified, if required.


How much money will it cost to drive 450 if gas cost 3.50 a gallon?

Not enough info. 450 what ?No mpg ratingPlease ask a new question with all required info.Not enough info. 450 what ?No mpg ratingPlease ask a new question with all required info.