It stands for standard Weight, the unit for light intensity.
Work is measured in energy or Joules (J), which is a watt*second (W*s). While power is measure in watts (W), which is amps*volts (A*V) or joules/seconds (J/s).
W is short for watt, which is a unit of power. 1 watt is the same as 1 joule/second.
The symbol for watts is "W." This unit is used to measure power, which is the rate at which energy is transferred or converted.
Watts (W) and volts (V) measure different electrical properties, so they cannot be directly converted without additional information. Watts measure power, while volts measure electrical potential. To relate them, you need to know the current in amperes (A) using the formula: Watts = Volts × Amperes (W = V × A). Thus, the conversion depends on the current flowing through the circuit.
The SI unit of measure for volume is the 'Litre'.
A tape measure to measure the height (h cm), depth (d cm) and width (w cm). Then capacity = h*d*w cm3 = h*d*w/1000 litres.
You can measure a peanut, b*w*h with cm or inches.
P = 2L + 2W P = 2(L + W) P/2 = L + W If the perimeter is given and you know one of the side measure length (i.e mL), then you can find the measure length of the other sides. If you know the measure length of L, then the measure length of W is P/2 - L = W,and vice versa.
You measure the length, L, in some units (inches, centimetres, whatever), measure the width, W, in the same units and then calculate L/W.
W= mxa ( wich is 9.8)
Measure length of the room, measure the width of the room L x W = Area of the room
You measure the energy E and divide it into hc. Wavelength w = hc/E = 0.2E-24/Energy.
The units used to measure heat conductivity are watts per meter-kelvin (W/mK).
Measure the length (L), width (W) and height (H). Then total surface area = 2*(L*W + W*H +H+L)
W. Hackenbroch has written: 'Existenz und Vielfalt von invarianten Massfortsetzungen' -- subject(s): Invariants, Measure theory
NO
9.8 newtons on earth W= MxG(9.8)