Necking is the localized reduction in cross-sectional area of a material subjected to a tensile force during a tension test. It usually occurs just before the material fractures. This deformation can be observed as a decrease in diameter in a tensile specimen.
To avoid dangerous tension in the glass.
tension
Small insects such can walk on water because their weight is not enough to penetrate the surface. A carefully placed small needle can be made to float on the surface of water even though it is several times as dense as water. If the surface is agitated to break up the surface tension, needle will quickly sink.
Tension does not have anything to do with evaporation.
To adjust a Tru Close hinge, locate the tension adjustment screw on the hinge body. Use a screwdriver to either tighten or loosen the screw to adjust the closing speed and tension of the hinge. Make small adjustments and test the gate to ensure it closes properly.
Necking is a localized deformation process where a material undergoes significant strain in a concentrated area. This concentrated strain can lead to increased stress and strain rates in that region, promoting tertiary creep. As the necking continues, the material undergoes acceleration in deformation until failure occurs.
..........necking is how giraffes fight each other...................
well if you are necking you are doing it on the neck right? if you are petting it you are doing it anywhere!
Pick-necking - 1933 was released on: USA: 8 September 1933
no
As "to be necking" is an informal expression, I will maintain this register in Spanish:Déjense de sus besos cachondosDejaos de vuestros besos cachondos
Giraffes defend themselves by kicking preditors and "necking". "necking" is when a giraffe swings its neck at another giraffe really hard. The reason giraffes have the little horns on their head is for necking so they can dig them into another giraffes neck.
rouph necking in the oil field is the people that drill wells even the drillers and tool pushers. the drillers and pushers are the management of the rig,they just moved up over the years of hard work and learning. rouph necking is a way of life.woooooooooooooooooooooooooooooooooooooooooooooo
Because people like to neck?
Tension meters like all precision instruments should be inspected and certified by a qualified company. Consult a certified test house to ensure that your tension meter meets NIST standards.
The term "necking" originated in the early 20th century and refers to the act of kissing, caressing or fondling someone's neck as a form of intimate expression. It is thought to derive from the idea of couples engaging in such behavior in parked cars, where necking was a common romantic activity.
an anomaly in the reflectogram can be caused by necking if the curve deflects first in the direction of the hammer blow, and then in the opposite direction before returning to normal. in the European usage, the hammer blow is plotted downwards. thus a necking in the pile causes the reflectogram to deflect first downwards and then upwards. if the anomaly is in the upper half of the pile, it can repeat itself one or more times, depending on the pile profile and soil properties. all consequent reflections will have the same characteristics as the first one - downward and then upward.