Hollow paper tubes used in fireworks are typically filled with a combination of combustible materials, including black powder (a mixture of potassium nitrate, charcoal, and sulfur), oxidizers, and various chemical compounds that produce colors and effects when ignited. These components are carefully packed to create the desired explosion and visual display. Additional elements, such as fuses and stars (small pellets coated with pyrotechnic compositions), are also included to control the timing and enhance the visual effects.
It depends on the rest of the sentence. If it's were "we're going to make fireworks", you're obviously a manufacturer. If it's "we're going to do fireworks" you may be planning a trip to the emergency room.
The two most common machines in firework manufuring is the ball mill which grinds up chemicals to make them very fine and for making black powder. The other common firework machine is a star roller which rolls firework chemicals onto a core and makes stars which are the pretty colors you see when a arial shell explodes.
People who make fireworks are typically referred to as pyrotechnicians or fireworks technicians. These individuals are responsible for designing, creating, and setting off fireworks displays for various events and celebrations. They require specialized training and expertise to handle fireworks safely and effectively.
Potassium nitrate is typically used to make medicine glass and fireworks.
You really should NOT make your own fireworks, unless you are trained to do so (and a trained expert would not be asking this question). If you try and make your own fireworks and you make a mistake, you could injure or kill yourself and people who happen to be near you. Leave fireworks to the experts, or you might regret it for the rest of your life.
You have to have paper
First lower the bridge to the lowest it can go (0meters). Then make sure you use all carbon steel. Try and use hollow tubes instead of solid steel. If possible check and see if you can use strong hollow tubes instead of weak solid steal... (ex. use 200mX200m hollow tubes instead of 100mX100m solid tubes) This is sometimes cheaper, not always though. Also once you have your bridge built and it works, look for simple ways to lower the cost, like lowering the strength of some steel beams or hollow tubes.
You make a giant paper boat (about 1 meter long), and a huge amount of origami fireworks. Then you load the origami fireworks onto the paper boat and set off the fireworks, lighting the boat on fire, burning all the paper cranes. Due to natural selection, those paper cranes which don't burn will be the ones to reproduce. Sooner or later the world will be populated with nothing but super-selected paper cranes.
it makes a hollow noise when you pull on it but when it is a normal piece of paper it makes a crinkly noise
To make a Paper Mache Dragon, you need a balloon, a whole lot of toilette paper tubes, and tape. Blow the balloon up to make the body and then tape the toilette paper tubes to the balloon to make the 4 legs tail and neck. Once every thing is taped caver the dragon with paper mache. To make paper mache: One part flour, two parts water.
Modern fireworks are made of paper, oxidizers, metals, fuels, and reducing agents. The different oxidizers in the firework make the different colors people see in the sky.
yes but apparently you have to mix it with paraffin wax and what not. http://www.ehow.com/how_4707971_make-scented-soap-candles.html
make fireworks
they make and develope fireworks. they make and develope fireworks.
First, make around two tubes using paper, then cut one of them in half, and the other about 3/4. Stick the tubes together using tape. Cover the gun in paper so the tubes don't show. Add on the stock, slimeguard (usually made from newspaper fillings in paper) and the ammo (same technique as the slimeguard). Cut a slot for the ammo, make a trigger, and voila, you're done. P.S. I made this already in around 1/2 hour.
First get two toilet paper tubes and put tape around them
Yes. Make tubes by rolling the paper up tightly seal it with glue and glue it all together. For details, google is your friend. =)