answersLogoWhite

0

What else can I help you with?

Continue Learning about Natural Sciences

Is 60 amp breaker good for 225 stick welder?

The 225 amps is the secondary output amperage. Look on the machines nameplate to find the input amperage. It is that amperage that is needed to size the feed wire and there the breaker size. When you find that amperage you may want to re question the breaker size.


What size breaker do you need for a well pump?

A breaker is based on the amperage that is drawn by the pump motor load. Find the full load amperage of the motor. The wire fed from the breaker has to be rated at 125% of the motors full load amperage. The breaker for motors have to be over sized, usually 250% of the motors full load amps.


Installing a 120volt appliance what breaker is needed at the electric box?

For a 120-volt appliance, a single-pole breaker with a rating suitable for the appliance's power requirements should be installed in the electric box. The amperage rating of the breaker should match the current draw of the appliance to ensure proper protection and operation. It is important to consult with a qualified electrician to determine the appropriate breaker size for your specific appliance.


What size in amperage circuit breaker should be used for a pool pump?

The size of the circuit breaker for a pool pump should be determined by the pump's current draw. The breaker should be sized to accommodate the pump's full load amperage with a 125% safety margin. Most pool pumps typically require a 15 or 20 amp circuit breaker.


Why does plugging too many appilances into the same circuit cause too much current to flow through the circuit what will happen as a result?

Each appliance has its own amperage. This can be shown by looking at the label of each appliance. A circuit is protected by a breaker which has a trip limit. By continually adding more amperage from different appliances, the circuit becomes overloaded. When the circuits limit is reached because of the additive effect of more appliances to the circuit the breaker will trip. This disconnects the appliance loads from the distribution panel supply and prevents over loading of the conductors of that circuit. Without removing some of the load amperage, the breaker will keep tripping when reset.

Related Questions

What prevents the main circuit breaker and the mission essential circuit breaker of the secondary distribution center from being energized simultaneously?

an interlocking device


Is 60 amp breaker good for 225 stick welder?

The 225 amps is the secondary output amperage. Look on the machines nameplate to find the input amperage. It is that amperage that is needed to size the feed wire and there the breaker size. When you find that amperage you may want to re question the breaker size.


What is the recommended amperage for an RV breaker, specifically for a 30 amp RV breaker?

The recommended amperage for a 30 amp RV breaker is 30 amps.


What is the recommended amperage for a circuit protected by a 50amp breaker?

The recommended amperage for a circuit protected by a 50-amp breaker is 80 of the breaker's rating, which is 40 amps.


What is the maximum amperage capacity of a 30 amp breaker?

The maximum amperage capacity of a 30 amp breaker is 30 amps.


What is the maximum amperage capacity of a 240 amp breaker?

The maximum amperage capacity of a 240 amp breaker is 240 amps.


What is the maximum amperage capacity of the main breaker in a 100 amp sub panel with main breaker?

The maximum amperage capacity of the main breaker in a 100 amp sub panel with a main breaker is 100 amps.


What is the maximum amperage capacity of a 30 amp breaker box?

The maximum amperage capacity of a 30 amp breaker box is 30 amps.


What is the maximum amperage capacity of a 60 amp circuit breaker?

The maximum amperage capacity of a 60 amp circuit breaker is 60 amps.


What is the maximum amperage capacity of a 90 amp circuit breaker?

The maximum amperage capacity of a 90 amp circuit breaker is 90 amps.


What is the maximum amperage rating for a double breaker 20 amp?

The maximum amperage rating for a double breaker 20 amp is 20 amps.


What is the maximum amperage capacity of a 100 amp Pushmatic breaker?

The maximum amperage capacity of a 100 amp Pushmatic breaker is 100 amps.