The center line of a hole measuring 1 inch in diameter would be located 0.5 inches from the edge of the hole in all directions. This line represents the midpoint of the hole and is essential for accurate positioning and measurements.
A quasar is a galaxy the gives off huge amounts of radiation, sometimes having a black hole at it's center. A black hole is a dead star that was big enough to "curl back in itself, like a snake eating it's tail."1 Or picking oneself up and carrying yourself by your bootstraps.One is a single star, one is a galaxy.(1 my words)
There are 8 fluid ounces in a cup. This can be proven by measuring out 8 fluid ounces of water using a measuring cup and pouring it into a standard 1-cup measuring cup, which will be filled to the brim.
During mitosis, cells line up at the center (also referred to as the equatorial plate) at metaphase. In meosis however, which is a reductional division, the process occurs twice and the cells line up at the centre at metaphase-1 and metaphase-2
No. The super massive black hole at the center of the galaxy has about 4 million times the mass of the sun while the galaxy as a whole has at leas 1 trillion solar masses. In other words the black hole at the center of the galaxy accounts for about one twenty-fifth of one percent of the galaxy's mass.
One that is fairly famous is Sagittarius A* - the supermassive black hole at the center of our Milky Way, about 26,000 light-years from here, and with a mass of about 4 million solar masses. For additional black holes, check the Wikipedia article "List of black holes".
there isn't any soil, a hole is a hole. if it had soil in it, it wouldn't be a hole would it.
Belgium coins with a hole in the center are the 5, 10, and 25 Centimes. The value of these coins minted in 1905 ranges from $1 to $3.
The diameter is the distance of a straight line that passes through the center of a circle or sphere. The measurement begins at one edge and ends at the other edge. It is a unit of measuring such as length or width.
To measure 1/2 tablespoon accurately, use a measuring spoon specifically marked for tablespoons and find the line that indicates half of a tablespoon. Fill the spoon to that line with the ingredient you are measuring.
There should be a square 1/2 hole off center of the tensioner use a 1/2 breaker bar in this hole to take tension off belt
Take number 1 plug out, put your finger in the plug hole turn motor over manually preferably, when piston is at top dead center it will blow air out of number 1 hole.
Step 1: Measure the center point of the circle Step 2: Draw a STRAIGHT line from the center point to the edge of circle (this can be anywhere) Step 3: The length between the center point and the circle itself is your radius. An easier way to measure this is measuring the length or width from your circle and divide it by 2.
measure the center of one hole to the center of the opposite hole. that measurement is the second number of the bolt pattern. the first number simply how many bolts there are. So, 5 X 5 1/2" means there are 5 bolts and the distance from one bolt hole to the opposite bolt hole is 5 1/2"
Measuring the current in each phase (or do you mean 'line'?) will not give you sufficient information to work out what you are asking for.
The volume = 6 x 2 x 1 = 12 cubic meters Actually there is no dirt in a hole.
you need to get the ruby and sapphire for the poke center on island 1
It has 1 line of symmetry through its vertical center