To calculate the current in a 1000 watt microwave, you would need to know the voltage it operates on. Using the formula Power = Voltage x Current, you can rearrange it to find Current = Power / Voltage. For example, if the microwave operates on 120 volts, the current would be approximately 8.33 amps (1000 watts / 120 volts = 8.33 amps).
Yes, you can use 14-2 gauge wire for a 1000 watt microwave, as long as it is on a 15 amp circuit. It is important to check the manufacturer's specifications and local electrical codes to ensure proper wiring for the appliance.
In general, a 1100 watt microwave will cook food faster than a 700 watt microwave. The cooking time difference will vary depending on the specific dish being prepared, but as a guideline, you can expect the 1100 watt microwave to cook roughly 50% faster than the 700 watt microwave.
Yes, you can run a 250 watt motor using a 1000 watt controller as long as the voltage and current ratings are compatible. Be sure to adjust the settings on the controller to match the motor specifications to prevent damage.
A 1000 watt ballast operating at 120V would draw approximately 8.33 amps of current. This can be calculated by dividing the power (in watts) by the voltage (in volts).
I think mini watt is an alias for milli watt, so 1000 mini Watts equals 1 Watt
Turn the microwave on for about 5 second, then look, then do it again untill it melts
To my knowledge there is no such a thing as a 1000 volt cooking microwave oven. If you mean 1000 watt then the answer to your question is yes. W = A x V. Presuming that the 15 amp receptacle is on a 120 volt system then the amperage draw on a 1000 watt microwave oven would be A = W/V 1000/120 = 8.3 amps with 6.6 amps to spare.
put it in the microwave for 35 secs (1000 watt).
Yes, you can use 14-2 gauge wire for a 1000 watt microwave, as long as it is on a 15 amp circuit. It is important to check the manufacturer's specifications and local electrical codes to ensure proper wiring for the appliance.
In general, a 1100 watt microwave will cook food faster than a 700 watt microwave. The cooking time difference will vary depending on the specific dish being prepared, but as a guideline, you can expect the 1100 watt microwave to cook roughly 50% faster than the 700 watt microwave.
Yes, you can run a 250 watt motor using a 1000 watt controller as long as the voltage and current ratings are compatible. Be sure to adjust the settings on the controller to match the motor specifications to prevent damage.
Power = (voltage) x (current) = 110 x 5 = 550 wattsIf operated at this level for 1 hour, thenEnergy = (550 watts) x (1 hour) = 550 watt-hours = 0.55 kilowatt-hour.Another AnswerAs microwave ovens don't operate continuously, but in short bursts, it's not really possible to determine an answer to your question without knowing the frequency and duration of these bursts of energy.
No, the current will be too high.
1 kilo Watt = 10^3 (1000) Watts 1 mega Watt = 10^6 (1,000,000) Watts 1000 kilo Watt = 1000*1000 Watts = 1,000,000 Watts = 1 Mega Watt Therefore...1000 kW = 1 MW Hope that helps! ^_^
A 1000 watt ballast operating at 120V would draw approximately 8.33 amps of current. This can be calculated by dividing the power (in watts) by the voltage (in volts).
Your question answers itself... 1000 watts, when operated on a 480-volt source..
I think mini watt is an alias for milli watt, so 1000 mini Watts equals 1 Watt