They have different numbers of neutrons and therefore different atomic masses.
Hydrogen-2, with 1 protons and 1 neutron has an Atomic Mass of 2.
Hydrogen-1, with 1 proton and no neutrons has an atomic mass of 1.
(By the way, the accepted way of writing these symbolically if you can't use subscripts is to put the number first, vis: 2H)
H1 and H2 wires are commonly used to refer to the high voltage (H1) and low voltage (H2) wires in electrical systems. H1 wires carry the higher voltage and are typically used for the main power supply, while H2 wires carry lower voltage and may be used for control circuits or secondary power sources.
H2+ has a stronger bond than H2. The addition of a positive charge to the H2 molecule increases the attraction between the two hydrogen atoms, resulting in a stronger bond.
Hebron is a city in the West Bank under the joint control of Israel and the Palestinian Authority. The city is divided into two sectors - H1 controlled by the Palestinian Authority and H2 controlled by Israel.
The reactants are hydrogen and nitrogen.
You can make a simple balance. There are (12.36 * 3) moles of H You have 2*H to form H2. So take the total from ammonia and divide by two to find the moles of H2 required.
Use the <h1> tag. E.G. <h1>This is in a big heading</h1>
H1 by far. The H2 is taller but the H1 is way wider.
The H1 is the original Hummer or Humvee, based on the military model. The H2 was introduced as a more consumer-friendly model, based on the Chevy Suburban body frame. It's narrower, but slightly longer and taller than the H1. They both share the distinctive Humvee grille design.
Oahu
H1, H2 or H3? They range from $33,000 for an H3 to $140,000 for an H1.
H1 and H2 wires are commonly used to refer to the high voltage (H1) and low voltage (H2) wires in electrical systems. H1 wires carry the higher voltage and are typically used for the main power supply, while H2 wires carry lower voltage and may be used for control circuits or secondary power sources.
h2 is more power full
In one go in an external or internal style sheet, you could do this to make all them red: h1, h2, p {color:red} You can also do them individually, if you wanted different colours: h1 {color:blue} h2 {color:green} p {color:red} As inline styles, you could do them like this: <h1 style="color:red">This heading is red</h1>
V1 = (1/3)(pi)(r12)(h1) V2 = (1/3)(pi)(xr12)(h2) V1 = V2 , which means that: (1/3)(pi)(r12)(h1) = (1/3)(pi)(xr12)(h2) Divide both sides by (1/3)(pi) and you get: (r12)(h1) = (xr12)(h2) -> (r12)(h1) = x2(r12)(h2) Divide both sides by (r12) and you get: h1 = x2(h2) -> h2 = (h1)/x2 For example: Cone1: r1 = 10, h1 = 10 Cone2: r2 = 30, h2 = (10/32) = 10/9 = 1.11111111 Then to check: Volume of a cone = (1/3)(pi)(r2)(h) V1 = (1/3)(pi)(102)(10) V1 = 1047.197551 = V2 1047.197551 = (1/3)(pi)(302)(h2) h2 = 1047.197551/((900pi)/3) h2 = 1.111111111 = 10/9
H1 sends a unicast message to H2, but the hub forwards it to all devices.
h2
AM General LLC Mishawaka, Indiana All Hummer H2 and HMMVEE (H1) are built in Mishawaka, Indiana.