pig iron is intermediate product of smelting of iron ore
sponge iron is product of direct reduction of iron ore in solid state
sponge iron production is continuous process sponge iron production is continuous process
Metallic iron refers specifically to the iron that is in its metallic form in sponge iron. Total iron in sponge iron includes metallic iron as well as any iron present in other forms such as iron oxides. Therefore, metallic iron is a subset of total iron in sponge iron.
Measuring the mass of sponge iron.
No, propane is not typically used as a feedstock for producing sponge iron. The most commonly used feedstock for sponge iron production is natural gas or coal. These feedstocks provide the necessary carbon and heat required for the direct reduction process to convert iron ore into sponge iron.
The yield of production of sponge iron is calculated by dividing the weight of sponge iron produced by the total weight of iron ore initially taken for the process, and then multiplying by 100 to get the percentage yield. It is important to consider losses during the process to get an accurate yield calculation.
http://encarta.msn.com/encyclopedia_761559225/iron_and_steel_manufacture.html Provides the answer. basic summary: 1. Pig Iron and Sponge Iron are the result of different production processes 2. Which results in different purities. Pig Iron has a lower purity than Sponge Iron.
sponge iron production is continuous process sponge iron production is continuous process
Metallic iron refers specifically to the iron that is in its metallic form in sponge iron. Total iron in sponge iron includes metallic iron as well as any iron present in other forms such as iron oxides. Therefore, metallic iron is a subset of total iron in sponge iron.
Measuring the mass of sponge iron.
Sponge iron contains carbon oxygen iron sulphur phosphorus when water is mixed it form reaction between oxygen and hydrogen it produce enomous heat that its starting to burn --
no difference
its darker
First sponge iron must be Roll crusher Next Magnet separation Next Create block sponge iron
No, propane is not typically used as a feedstock for producing sponge iron. The most commonly used feedstock for sponge iron production is natural gas or coal. These feedstocks provide the necessary carbon and heat required for the direct reduction process to convert iron ore into sponge iron.
Yes, sponge iron making is a primary or can be a primar metallurgical process base on the Chemistry information that is provided.
ther isnut
No. Iron III oxide is an ionic compound. This is due to the large difference in electronegativity between oxygen and iron. If the electronegativity difference is greater than 2.0 a compound is generally ionic. The difference between iron and oxygen is 2.61.