answersLogoWhite

0

The field of view would be 80 times the diameter.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

What is the diameter of the field of view is 5.6mm at 40x?

The field of view's diameter is inversely proportional to magnification; thus, the 5.6mm diameter at 40x magnification would become 140mm at 1x magnification. Mathematically, Field of view diameter = FOV1 / Magnification1 = FOV2 / Magnification2.


How do you calculate field diameter?

Field diameter is calculated by measuring the distance across the field of view of a microscope, then dividing that measurement by the magnification of the objective lens being used. This gives you the field diameter in micrometers.


How many pith cells would fit across the diameter of low-field of a microscope?

To determine how many pith cells would fit across the diameter of a low-field microscope view, we first need to know the average size of a pith cell, which is typically around 0.1 to 0.5 mm in diameter. Low-field microscopes usually have a field of view diameter ranging from about 1 mm to 5 mm. Therefore, depending on the size of the pith cells and the specific field of view, approximately 2 to 50 pith cells could fit across the diameter of the microscope's view.


What size is an object if the diameter field of view is 4.5mm?

The size of the object would depend on its distance from the observer. The diameter of the field of view refers to the circular area you can see through a microscope or similar device and not the actual size of an object.


FOV of microscope?

The field of view (FOV) of a microscope refers to the area visible through the lens. It is determined by the diameter of the microscope's field diaphragm and the objective lens magnification. A higher magnification will typically result in a smaller field of view, while lower magnifications will have a larger field of view.

Related Questions

What is the diameter of the field of view is 5.6mm at 40x?

The field of view's diameter is inversely proportional to magnification; thus, the 5.6mm diameter at 40x magnification would become 140mm at 1x magnification. Mathematically, Field of view diameter = FOV1 / Magnification1 = FOV2 / Magnification2.


What is the relationship between magnification and the diameter of the field of view?

Magnification is inversely proportional to the diameter of the field of view.


How big is the worm relative to the diameter of the field of view?

At low power on the compound microscope, the diameter of the field of view is 4 millimeters. This is reduced to 1.7 millimeters when you switch to medium power


How do you calculate a microscopes field of view?

Since the field of view is a circle, the size of the field of view is it's area. You would need to find the diameter of the field of view, using a transparent ruler or a micrometer. Divide the diameter measurement by 2 to get the radius. Then use the formula for the area of a circle, Area = πr2. For example, you measure the diameter of the field of view to be 2.14mm. Divide 2.14mm by 2 to get the radius, and you get 1.07mm. Square 1.07mm, which is 1.14mm2. Multiply x 3.14 (pi), and you get 3.58mm2. So the field of view for this example would be 3.58mm2.The field of view differs with different magnifications. The lower the magnification, the larger the field of view.


What is the relationship between the diameter of the microscope field and its magnification?

As the magnification of a microscope increases, the diameter of the field of view decreases. This is because higher magnification allows for more detailed observation of objects, but with a narrower field of view. Conversely, lower magnification provides a wider field of view but with less magnification.


How do you calculate field diameter?

Field diameter is calculated by measuring the distance across the field of view of a microscope, then dividing that measurement by the magnification of the objective lens being used. This gives you the field diameter in micrometers.


What is To use a ruler to measure the field of view of a microscope called?

This process is called calculating the field of view diameter on a microscope. It involves measuring the diameter of the field of view using a ruler and knowing the magnification of the objective lens to determine the actual size of objects viewed under the microscope.


How many pith cells would fit across the diameter of low-field of a microscope?

To determine how many pith cells would fit across the diameter of a low-field microscope view, we first need to know the average size of a pith cell, which is typically around 0.1 to 0.5 mm in diameter. Low-field microscopes usually have a field of view diameter ranging from about 1 mm to 5 mm. Therefore, depending on the size of the pith cells and the specific field of view, approximately 2 to 50 pith cells could fit across the diameter of the microscope's view.


What is the diameter when you have 1.2mmhigh power filed and an object that occupies one third of that field?

To find the diameter of the field of view at high power, you can use the height of the field. If the field is 1.2 mm high and the object occupies one third of that field, then the height of the object is 0.4 mm (1.2 mm / 3). The diameter of the field of view is equal to the height when viewed in a circular field, so it remains 1.2 mm.


What size is an object if the diameter field of view is 4.5mm?

The size of the object would depend on its distance from the observer. The diameter of the field of view refers to the circular area you can see through a microscope or similar device and not the actual size of an object.


FOV of microscope?

The field of view (FOV) of a microscope refers to the area visible through the lens. It is determined by the diameter of the microscope's field diaphragm and the objective lens magnification. A higher magnification will typically result in a smaller field of view, while lower magnifications will have a larger field of view.


How do you calculate the field diameter of the medium power lens?

The equation goes like this and works for both medium AND high feild diameter : Medium(High) DIA. = Low Diameter / [Med(High)mag/low mag] Brackets () are NOT for multiplication, they are for the other formula.