What is the liquid that leaves the condenser called
The apparatus is called a condenser. It cools the hot vapor produced during distillation, causing it to condense back into liquid form, which can then be collected.
Subcooling the liquid refrigerant before it leaves the condenser helps to increase the refrigeration system's efficiency by ensuring that the refrigerant is in a completely liquid state. This can improve the system's cooling capacity and reduce the risk of compressor damage due to the presence of any vapor in the system.
A condenser is generally an object made from glass, used to condense a gas to a liquid.
Without cooling liquid, a condenser will not be able to efficiently remove heat from the system it is a part of. This can lead to overheating of the system, potentially causing damage or failure of components. It is crucial for the condenser to have proper cooling to perform its function effectively.
The steam when cooled changes back to liquid water
In Liquid state
No, refrigerant is not a low-pressure liquid as it leaves the condenser. Instead, it exits the condenser as a high-pressure liquid after dissipating heat. This high-pressure liquid then flows to the expansion valve, where it is allowed to expand and drop in pressure before entering the evaporator.
A condenser rejects heat to the environment to turn vapor into liquid. Ideally a vapor enters the condenser as saturated vapor, meaning it's at the boiling point. The vapor condenses and leaves the condenser at saturated liquid (also at the boiling temperature).
The reason why it is called a barometric condenser is because it makes contact and it is a long vertical pipe into which it condensates and cools the liquid flow to accomplish the removal of pressure. It is also stated that when the pump is used the system is called a low level barometric condenser.
This equipment is called condenser.
When the refrigerant leaves the compressor, it is in a high-pressure gas state. It then flows through the condenser coils, where it releases heat and condenses into a high-pressure liquid before entering the expansion valve.
In electromechanical terms a condenser is a device that facilitates the condensation of vapor into a liquid; for example water vapor into liquid water.Condensers are used in refrigeration units to remove heat.In electrical terms a condenser (now called a capacitor) is used to store and release electrical charge.
The apparatus is called a condenser. It cools the hot vapor produced during distillation, causing it to condense back into liquid form, which can then be collected.
Liquid receivers are used to store the liquid refrigerant after it leaves the condenser. It should be located below the condenser to enable natural flow. The receiver may be constructed either vertically or horizontally and should have sufficient capacity to hold the entire system's refrigerant charge. The design should be such that only liquid refrigerant leaves the receiver and enters the liquid line. by vishal mahnn
Condenser use to condense the liquid for e.g: seperation of an emulsion by condensing the liquid & form different layer of oil & water &more dense liquid willlie at the bottom by that we can seperate the liquid. ;-)
The Refrigerant enters the condenser as a high pressured gas, the condenser then condenses that gas and changes it to a liquid form.
Subcooling the liquid refrigerant before it leaves the condenser helps to increase the refrigeration system's efficiency by ensuring that the refrigerant is in a completely liquid state. This can improve the system's cooling capacity and reduce the risk of compressor damage due to the presence of any vapor in the system.