0
What else can I help you with?
How many turns of wire rope must remain on drum?
A minimum of 3 full turns of wire rope should remain on the drum to ensure proper spooling and prevent the rope from slipping off during operation. This provides enough grip and stability on the drum to safely handle the load without risking the integrity of the wire rope.
Would you cause a 55 gallon drum of water to weigh more by climbing in?
Yes --assuming you don't hold your breath. A person will sink in water if he is not holding enough air in his lungs to keep him floating. Therefore, the person weighs more than the amount of water that he will displace.
How much does a 55 gallon drum of soiled rags weigh?
The weight of a 55-gallon drum of soiled rags can vary significantly depending on the type of rags and the amount of liquid absorbed. On average, a full drum may weigh between 300 to 500 pounds. Factors such as the material of the rags and the extent of soiling will influence the total weight. It's essential to consider these variables for a more accurate estimate.
Why boiler drum manhole in elliptical in shape?
as the boiler drum is cylindrical in shape due to low stress concentration and in both end the diameter will be less.so for easy entry into the drum for a man the drum man hole is elliptical in shape.
Why shouldn't you store toxic chemicals in metal drum?
Because the drum could rust through and release the chemicals, or be contacted by electricity and cause a fire...if you need to store toxic chemicals in a metal drum, you put a drum liner in first, and pour the chemicals into the liner. A drum liner is a very thick plastic bag.
How many turns of wire rope must remain on drum?
A minimum of 3 full turns of wire rope should remain on the drum to ensure proper spooling and prevent the rope from slipping off during operation. This provides enough grip and stability on the drum to safely handle the load without risking the integrity of the wire rope.
What is minimum drum thickness on 1993 f250?
It will be stamped on the drum
How many drums in the smallest type of drum kit?
I suppose minimum would be a bass drum, snare drum and hi-hats
Tight as a tourniquet dry as a funeral drum?
Its one of my turns
How many wire rope most be turn around draw works drum minimum?
Minimum of 10%
How much are drummers?
Do you mean drum kits? if so then about £200 minimum
What is the minimum number of wraps left on the drum when the hook is in its lowest position?
2 wraps
What is the role of pcr in laser toner?
Pcr serves to transfer an electric charge to the surface of photo conductor drum located in toner cartrige, the pcr is in contact with opc drum as drum turns,any loosr deposits on pcr transfarred to the drum
How much mass would it take to sink a 1.5 cubic meter drum?
Assuming that the drum itself has no mass and weight, calculate the mass of the liquid in which you want to place the drum. Use the formula: mass = density x volume The amount of mass to sink the drum will have to be that amount, or more.
What is a mouli?
A mouli is a hand held food grater. It has a central drum with a handle that turns. This drum has holes all over it - like a vertical colander. The outer drum pushes the food against the inner drum so that the food is squeezed through the holes. The result is finely pureed food. I have a mouli where the holes are like a fine grater and use it to grate Parmesan or Reggianno cheese. It's ideal where you need just a little amount of food pureed.
Why boiler drum manholes are elliptical in shape?
as the boiler drum is cylindrical in shape due to low stress concentration and in both end the diameter will be less.so for easy entry into the drum for a man the drum man hole is elliptical in shape.
What is the purpose of the kick drum resonant head and how does it affect the sound of the drum?
The purpose of the kick drum resonant head is to control the sustain and tone of the drum. It affects the sound by influencing the amount of air that can escape from the drum, which in turn impacts the depth and pitch of the sound produced.
