The part on a machine that regulates speed is called a governor. It works by adjusting the flow of fuel or other input to control the speed of the machine. Governors are commonly used in engines and other mechanical systems to maintain a consistent speed under different conditions.
The vacuole
No part - it's regulated by the (beta cells of the) pancreas.
Cerebellum
meter in: regulates the speed of the actuator by controling the amount of fluid entering in to the actuator. meter out: regulates the speed of the actuator by controling the amount of fluid leaving the actuator. bleed off: regulates the speed of the actuator by metering a part of the pump flow to the tank. Prof. Mahesh Chopade MIT College of Engineering, Pune
Short answer no. But in reality it depends on what the machine is and how well it is built. Know that if the correct operation of the machine depends on the motor running at the correct speed, then running a 50Hz machine on 60Hz will cause it to run at the wrong speed. The motor will turn faster. This will put a strain on the wiring and it very well may fail prematurely.
The part of the brain that regulates water balance also regulates body temperature. This part of the brain is called the hypothalamus.
The machine is called a governor. It regulates the speed and performance of machines to prevent them from operating beyond their design limits, protecting them from damage and ensuring stability.
the clock oscillator and machine cycle state machine, it may take multiple clock cycles per machine cycle.
Gears are a toothed machine part, such as a wheel or cylinder, that meshes with another toothed part to transmit motion or to change speed or direction.
It is the machine's foot-pedal. Basically, it enables an operator to use both hands while controlling the speed or the operation of a machine with the foot. A simple example is a sewing machine.
oten
It regulates the thightness or lossness of the thread.
The hypothalamus.
The vacuole
The throttle controls the governor which regulates engine speed.
tension control
It is the jog speed or a slower speed of the machine.