It is when a group of people die in a circuit thanx for reading!!!!!!!!!!!!
A switch makes a physical break in the electric circuit. With the circuit broken the electricity can not flow. When the switch is turned the other way the circuit is completed and the current/electricity can flow.
The switch needs to be in the "on" position for the circuit to work, allowing the flow of electricity through the circuit. In the "off" position, the switch breaks the circuit, stopping the flow of electricity.
Closing a switch makes a closed circuit Opening a switch opens, or breaks the circuit
A switch is a device used to break a circuit. By opening the switch, the circuit is interrupted and electricity stops flowing. This allows for controlling the flow of electricity to different components in a circuit.
An open switch circuit is a circuit where the switch is in the "off" position or where the circuit is not complete, preventing the flow of electricity through the circuit. This results in no current flowing and no electrical devices being powered or functioning.
where is the pnp swich on my v70 volvo
Park and Neutral Position Switch
An NPN or sinking output accepts voltage and sinks it to ground to complete the circuit. A PNP or sourcing output sources voltage and the external circuit sinks it to ground to complete the circuit. A sourcing circuit would be drawn as voltage->switch->load->ground. A sinking circuit would be drawn as Voltage->load->switch->ground. In these cases, the switch could be a transistor.
You can use a PNP or an NPN transistor in a fire alarm circuit. Both will work. It all depends on how you want to energize the alarm, and with what polarity of signal.
check PNP switch (neutral safety switch)
PNP means positive negative positive and viceversa. while both can be used on a circuit its polarity application must be followed.
Look at this link http://www.rason.org/Projects/transwit/transwit.htm
A switch is placed in an electrical circuit in order to place a gap when the switch is off, so the circuit is broken. When the switch is on, the circuit is complete and the electricity can flow round the circuit.
A switch makes a physical break in the electric circuit. With the circuit broken the electricity can not flow. When the switch is turned the other way the circuit is completed and the current/electricity can flow.
The switch needs to be in the "on" position for the circuit to work, allowing the flow of electricity through the circuit. In the "off" position, the switch breaks the circuit, stopping the flow of electricity.
Not sure what you mean with "lemon circuit", but in an electrical circuit, the switch can be just about anywhere.
For an electrical circuit to keep going, it cannot be interrupted. When the switch is adjusted, the electrical flow is interrupted. Move the switch again and the flow is restored. Without a switch a circuit is no longer considered a complete circuit. Simple fifth grade science.