The purpose of the Panhard Rod is to take up lateral forces between the axle and body thus removing load from the radius arms.
Clément-Panhard was created in 1898.
It is used for grinding and mixing chemicals in lab.
A lightning rod is an electric conductor. Its purpose is to safely conduct the electrical charge from a lightning strike to the ground, thus protecting the structure it is attached to.
Is it an inner or an outer tie rod. If it's an outer, than you loosen the jam nut on the tie rod, undo the tie rod end from the strut or steering arm/spindle or whatever it's connected to. And count how many times you turn it on removal, then install the new one and do the same in reverse, count the turns on installation so you have a similar alignment by the end
it is a rod made of copper
Panhard ended in 1965.
Panhard was created in 1891.
Coil sprung, solid axle, with radius arms and a panhard rod.
René Panhard died in 1908.
René Panhard was born in 1841.
Clément-Panhard was created in 1898.
Stirling-Panhard was created in 1898.
Panhard Dyna X was created in 1946.
It controlls the lateral side to side movement or keeps your rearend from shifting side to side while turning
It's a Panhard PL17 made in France from 1959 to 1965 by Panhard et Levassor, a subsidiary of Citroen. Their last car was made in 1967 after which Panhard has made only military vehicles.
The maximum speed of Panhard Dyna 2cyl 42HP 1962 is 180 km per hour.
The maximum speed of the panhard dyna 2cyl 42HP 1962 is 180 km per hour.