Voltage times amps equals watts. A watt is sometimes called a volt-amp because one volt times one amp equals one watt.
That depends on the voltage. One amp flowing at a potential of 1 volt produces 1 watt of power (equal to an energy consumption of 1 joule per second). 4 amps flowing at a voltage of 250 volts produces a kilowatt of power. This would be enough to satisfy the individual needs of a lot of the electrical equipment around the house.
For a 1500 watt hot water heater connected to a 110 volt power source, you would need a 13.6 amp circuit. It is recommended to use a 15 amp circuit to provide some safety margin.
To calculate the breaker size for a 1500-watt 120-volt heater, use the formula: Breaker size = Power (Watts) / Volts. In this case, 1500 watts / 120 volts = 12.5 amps. Therefore, you would need a 15-amp breaker for a 1500-watt 120-volt heater to allow for a safety margin.
AWG # 10 wire on 30 amp circuit.
To determine the fuse size for a 200 watt amp, you will need to divide the power rating by the voltage of the system. If the amp operates on a 12V system, the amperage would be around 16.67A, so a 20A fuse would be appropriate for a 200 watt amp.
Volt-amp is a unit of apparent power, which is the combination of voltage and current in an electrical circuit. Watt, on the other hand, is a unit of real power, which is the actual power consumed by a device. The relationship between volt-amp and watt is that watt is the product of volt-amp and power factor, which represents the efficiency of the electrical system. In simple terms, watt is the actual power used by a device, while volt-amp is the total power flowing through the circuit.
There is no way to answer that. A watt is one volt times one amp. A hertz is one cycle per second. There is no correlation between them.There is no way to answer that. A watt is one volt times one amp. A hertz is one cycle per second. There is no correlation between them.
There is no volt meter or amp meter in a DC watt meter.
One watt is one amp times one volt
A 20 amp 240 volt circuit can provide 4800 watts.4800 watts / 6 watt per foot = 800 feet.
That depends on the voltage. One amp flowing at a potential of 1 volt produces 1 watt of power (equal to an energy consumption of 1 joule per second). 4 amps flowing at a voltage of 250 volts produces a kilowatt of power. This would be enough to satisfy the individual needs of a lot of the electrical equipment around the house.
Amp(ere) is the unit for current flow. Volt is the unit for electrical tension. Watt is the unit for power Since Watt is Volt x Ampere , there is no way to answer your question. But with your newfound knowledge, you can now calculate yourselves :-)
On a 12 volt system the 80 watts draws 6.7 amp and the 120 watts draws 10 amps.
a 220 volt, 3200 watt oven will draw under 15 amps, so yes a 2o amp breaker will work.
For a 1500 watt hot water heater connected to a 110 volt power source, you would need a 13.6 amp circuit. It is recommended to use a 15 amp circuit to provide some safety margin.
20 amp
You'd blow out the light.