A wattmeter is used to measure the power of a load.
The resistance of a ballast can vary depending on its design and specific characteristics. To calculate the resistance of a 36-watt ballast, you would first need to know the voltage it operates at. Using Ohm's Law (R = V^2 / P), where R is resistance, V is voltage, and P is power, you can determine the resistance.
The SI unit for power is the watt, symbolized as W.
the answer for the si unit of power is the watt or w
When connected to a 110-volt supply, the 60-watt 220-volt lamp will consume power that is calculated using the formula P = V^2 / R, where P is power, V is voltage, and R is resistance. Since the resistance of the lamp remains constant, the power consumption would be (110^2 / 220) = 55 watts. Thus, the lamp would consume 55 watts of power when connected across a 110-volt supply.
The unit of power measured is watt, irrespective of resistance, capacitance or inductance of the circuit.
A power rating of 1 joule per second is known as 1 watt.
If you mean how to use a resistance of so much power then it can be easily done through a step-down transformer which lowers the voltage supply and hence the power.
Ohm's Law: V = I * R (Voltage = Current * Resistance) Watt's Law: P = V * I (Power = Voltage * Current)
They're are not related. Watts are measurement of power while Ohms are measurement of resistance. One watt equals one volt times one amp.
Power = I2 R = (0.02)2 x (1,000) = 0.4 watt
No. The power (in watts) would decrease, due to the greater effective resistance.
voltage is measured in ohms which is represented by the omega sign.
As per the formula for power (Power (Watt) = Voltage (V) x Current (i) & Resistance (R) = V / i), 25w lamp bulb would have higher resistance compared to that of 5w lamp bulb.
The resistance of a light bulb varies, depending on the type of bulb, the power rating, and the temperature. A typical incandescent 60 watt bulb, for instance has a cold resistance of about 30 ohms, and a hot resistance of about 240 ohms.
A "watt" is a derived unit of power.
yes/no