1.Alternator or Generator- windmill,thermal power,hydel power,atomic power.
all this makes mechanical rotaion enegryand coupled to alternator to give electical energy.
2.Battery cell (chemical reaction)
3. solar energy both photo voltic cell or Heat concentration method form sunlight.
are you dum?a circuit with a source of energy and at least one conductor is blah.
battery, generator, alternator, etc.
The circuit needs some sort of energy source. This can be a battery/cell, or an AC outlet for example.
When an electric cell is a part of a complete electric circuit, the chemical energy of its chemical is converted in to electrical energy.
The "why" is a bit hard to answer, but this is just part of a more general situation: you need an energy source to make ANYTHING work. The real reason for all this is the so-called "Second Law of Thermodynamics".Specifically in the case of an electrical circuit, a current will flow as a result of a voltage. The details are expressed in Ohm's Law.
i think it may be energy source
are you dum?a circuit with a source of energy and at least one conductor is blah.
Voltage source: is any source that voltage and amperage come from. Resistor: is any part of a circuit that consumes that energy!
the energy source cercuit the diagram with coultghmtr that destryos the circuit
The potential difference is provided by the power source, which can be a battery or some form of electric generator. Inside the source, electric charges are raised up a potential gradient, and they then give up their energy as they travel down the potential gradient in the circuit that is being supplied with energy.
battery, generator, alternator, etc.
energy source :)
battery, generator, alternator, etc.
Three basic parts of a circuit are: 1. Active components = source of energy 2. Transmission Lines = wiring and control devices 3. Passive components = load or user of energy
The bulb converts energy from the power source into light and heat. It is the load in the circuit.
open circuit is when there is a break in your closed loop circuit (example: loose connection) and no current is flowing
The circuit needs some sort of energy source. This can be a battery/cell, or an AC outlet for example.