Specific weight is a substance's weight (not mass) per unit volume. If you take a known volume of something -- say a cubic foot of it -- and place it on a scale, you know how much it weighs per cubic foot. So, let's say you have a cubic foot of water. Although its weight will vary somewhat with temperature, its average SW is about 62.4 pounds per cubic foot. Compare that to gasoline at 42.5 pounds per cubic foot and Mercury at 847 pounds per cubic ft.
In the CGS system, the unit of frequency is measured in hertz (Hz), just like in the International System of Units (SI).
The centimetre-gram-second system (abbreviated CGS or cgs) is a metric system of physical units based on centimetre as the unit of length, gram as a unit of mass, and second as a unit of time. All CGS mechanical units are unambiguously derived from these three base units, but there are several different ways of extending the CGS system to cover electromagnetism.CGS approach to electromagnetic units The conversion factors relating electromagnetic units in the CGS and SI systems are much more involved - so much so that formulas for physical laws of electromagnetism are adjusted depending on what system of units one uses. refer to link below for methods
In the MKS (Meter-Kilogram-Second) system, the unit of displacement is the meter (m). In the CGS (Centimeter-Gram-Second) system, the unit of displacement is the centimeter (cm). In the SI (International System of Units), which is an extension of the MKS system, the unit of displacement remains the meter (m). Thus, the units of displacement across these systems are meters in MKS and SI, and centimeters in CGS.
In the CGS system, the unit of mole is the "mole" itself. The quantity of substance is still represented by Avogadro's number, which is approximately (6.022 \times 10^{23}) entities.
To convert kilograms (kg) to the CGS unit system, you would need to use the conversion factor 1 kg = 1000 grams and then convert from grams to CGS units. In the CGS system, 1 gram = 1000 milligrams = 100 centigrams = 10^6 micrograms. So, if you have a mass in kilograms, you would need to multiply by 10^6 to convert to centigrams in the CGS system.
The SI unit of sound is the decibel (dB), which measures sound intensity. In the CGS system, the unit of sound is the bel (B), where 1 bel is equivalent to 10 decibels.
stilb(sb)
The unit of energy in the CGS system is the erg. It is a small unit of energy equal to 10^-7 joules.
The cgs power unit is the erg, a dyne-centimeter.
The cgs unit for sound is the erg per second per square centimeter (erg/s/cm^2). This unit is used to measure the intensity of sound.
In the CGS system, the unit of frequency is measured in hertz (Hz), just like in the International System of Units (SI).
The unit of energy in the centimeter-gram-second (CGS) system is the erg.
The cgs unit of current in electromagnetic system equivalent to 10 amperes is 10 amperes.
The unit of thermal conductivity in the cgs system is cal/(cmsK), where cal is the calorie, cm is centimeter, s is second, and K is Kelvin.
Statcoulumb is the unit of charge in cgs system.
CGS unit of time is Second,s.
The centimetre-gram-second system (abbreviated CGS or cgs) is a metric system of physical units based on centimetre as the unit of length, gram as a unit of mass, and second as a unit of time. All CGS mechanical units are unambiguously derived from these three base units, but there are several different ways of extending the CGS system to cover electromagnetism.CGS approach to electromagnetic units The conversion factors relating electromagnetic units in the CGS and SI systems are much more involved - so much so that formulas for physical laws of electromagnetism are adjusted depending on what system of units one uses. refer to link below for methods