answersLogoWhite

0

The current-carrying capacity of a 70 square mm cable depends on various factors, including the type of insulation, installation conditions, and ambient temperature. Generally, for copper cables in free air, the capacity can be around 200-300 amps, while for cables installed in conduit or underground, it may be lower due to heat dissipation limitations. It's essential to consult relevant electrical codes or standards for precise values based on specific conditions.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Continue Learning about Natural Sciences

How many amps can mm sq electrical cable can carry?

The ampacity of an electrical cable depends on several factors, including the cable's cross-sectional area (in mm²), insulation type, installation conditions, and ambient temperature. As a general rule of thumb, copper cables can carry approximately 10 amps per mm² for low-voltage applications. For example, a 1.5 mm² copper cable typically carries around 10-16 amps, while a 2.5 mm² cable can carry approximately 16-25 amps. Always consult local electrical codes and standards for specific applications.


What size of cable gland for in metric 24 pair 1.5 mm sq cable?

For a 24 pair 1.5 mm sq cable, you would typically use a metric M40 size cable gland. This size provides enough room for the cable to pass through while maintaining a secure seal to protect against dust and moisture.


How deep do you bury 120v wire?

Minimum coverage for non vehicular areas; for conductors or cable not having a metal sheath or armour, under 750 volts, the required depth is 600 mm. For conductors or cable having a metal sheath or armour, under 750 volts, the required depth is 450 mm. Minimum coverage for vehicular areas; for conductors or cable not having a metal sheath or armour, under 750 volts, the required depth is 900 mm. For conductors or cable having a metal sheath or armour, under 750 volts, the required depth is 600 mm.


What is the voltage drop for 16 mm Cable over 100 meters?

The voltage drop depends on the current through the cable.For DC current in cable of 16 mm diameter, at 68° F, the voltage drop is(0.00857) x (current, Amperes) volts.


What is amp rating 2.5sq mm cu cable?

The amp rating of a 2.5sq mm copper cable depends on factors such as insulation type, installation method, ambient temperature, and specific application. In general, a 2.5sq mm copper cable can typically carry around 20-25 amps of current in a typical household wiring scenario. It is recommended to consult with a qualified electrician or refer to local electrical codes for precise amp ratings.

Related Questions

How many square meters in 70square yards?

58.52


What diameter is 240 sq mm cable?

The 240 sq. mm cable has a diameter of 17.48 mm. It can carry up to 425 Amps current in a duct and up to 520 Amps in open air.


What is square mm in cable size?

cabla sq,mm to amps


In 3 hp 415vOLT what are the size of cable in mm?

6mm cable


What is the diameter of 35 mm square cable?

The diameter would be 6.67 mm


What is the Formula to know about of dc cable size in mm?

how to know dc cable sizes


Does a 4corex630 sq mm cable carry the same current as a single core 630 sq mm cable?

4-core 630 mm-sq cable sounds like 4 cores each of 630 mm-sq as used on 400 kV power lines, in which case it carries 4 times the current.


How do you know the sq mm of a cable?

150 sqmm


Can we use 150 mm 3.5 4 core cable as a 150 mm 4 core cable?

Yes. remember that one core is with reduced size by half.


What is the meaning of YFY and 3G X 4 SQ MM LAPP CABLE?

Lapp is the name of the manufacturer, but this is a 3-wire cable with conductors of 4 sq. mm. in size.


Will this work for using external speakers with the PS4 PS4Optical Audio Cable Optical Audio to RCA Cable converter RCA Cable with 3.5 mm jack Logitech Speakers with 3.5 mm jack input?

To use analog 3.5 mm jack RCA cables and the PS4 optical audio cable, you will need a DAC; then your Logitech speakers should work.


How many amps can mm sq electrical cable can carry?

The ampacity of an electrical cable depends on several factors, including the cable's cross-sectional area (in mm²), insulation type, installation conditions, and ambient temperature. As a general rule of thumb, copper cables can carry approximately 10 amps per mm² for low-voltage applications. For example, a 1.5 mm² copper cable typically carries around 10-16 amps, while a 2.5 mm² cable can carry approximately 16-25 amps. Always consult local electrical codes and standards for specific applications.