meh
The end correction of a meter bridge can be measured by comparing the balance point of a known standard wire to the balance point of an unknown wire on the meter bridge. The difference in lengths between the two balance points is equal to the end correction.
The electrical power that you use from the utility company has to be metered. This is done with a plug in watt meter. The meter socket is what holds the electrical watt meter. It is this meter that the meter reader reads to give you your monthly billing for the electricity that you used.
Using a calibrated pH-meter with correction for temperature and slope.
Miles
No, a meter stick is not the appropriate tool to measure a chalkboard, as its length may exceed the meter stick's range. Instead, a measuring tape or a ruler that can accommodate the length of the chalkboard would be more suitable for accurate measurement.
meh
it is a sexual innuendo for architects. :P
A meter bridge is used to measure an unknown electrical resistance by comparing it with a known resistance. It works on the principle of Wheatstone bridge. By balancing the bridge circuit, the value of the unknown resistance can be calculated accurately.
Type your answer here... By use an inductance meter or an inductance bridge
Horse reins are what jockey's use to "brake" a horse.
It's not necessary to use 1 m of wire. Any length can be used.
The French use the word "jockey" (masculine noun).
A Carey-foster's bridge is a modified version of the meter bridge (wheatstone bridge or potentiometer). It can be used to find out the average resistance per unit length of the meter bridge wire and hence find out the unknown resistance. It is more accurate and more sensitive than a meter bridge.
You click on the Jockey House and click on your jockey and there are several buttons that you can use to customize your jockey.
We saw as the jockey rode past all the others in the race
3,015 meter
abc