0
What else can I help you with?
What is the function of a Carey foster bridge?
A Carey-foster's bridge is a modified version of the meter bridge (wheatstone bridge or potentiometer). It can be used to find out the average resistance per unit length of the meter bridge wire and hence find out the unknown resistance. It is more accurate and more sensitive than a meter bridge.
How do you perform practical of meter bridge?
abc
What is the length of Saraighat bridge?
3,015 meter
What is Use of jockey in meter bridge?
meh
Is the mackinac bridge the same as the mighty mac bridge?
it is called it cause it is so long so that is y they call it the mighty mac
What is the difference between Wheatstone bridge and meter bridge?
WHEATSTONE BRIDGE : A wheatstone bridge is used to measure an unknown electrical resistance by balancing two legs of a bridge circuit, one leg of which includes the unknown compound.Its operation is similar to the original potentiometer. METER BRIDGE : A uniform resistance wire 1 meter in length, mounted above a scale marked in millimeters, with terminals added to make the device usable as either part of a wheatstone bridge or of a potentiometer.
In physics what is the use of meter bridge?
A meter bridge is used to measure an unknown electrical resistance by comparing it with a known resistance. It works on the principle of Wheatstone bridge. By balancing the bridge circuit, the value of the unknown resistance can be calculated accurately.
What is end correction in meter bridge?
End correction in a meter bridge refers to the added resistance due to the non-zero dimensions of the connecting wires or strips at the ends of the bridge. This added resistance needs to be accounted for when using the meter bridge for precise measurements. Calculating the end correction helps ensure accurate results when determining unknown resistances.
Are there any videos where metre bridge, commutator and Peltier's effect are explained together?
(a) The connection between the resistors in a meter bridge is made of thick copper strips because the resistivity of a copper wire is very low. As, the connections are thick, so the area becomes large and the resistance of the wires becomes almost negligible. (b) It is preferred to obtain the balance point in the middle of the meter bridge wire because it improves the sensitivity of the meter bridge. (c) Constant is used for meter bridge wire because its temperature coefficient of resistance is almost negligible due to which the resistance of the wire does not get affected on increasing temperature of the wire during flow of current.
What is a Chinese bridge called?
The Chinese bridge is called Kangshaun great bridge
How do you measure end correction of a meter bridge?
The end correction of a meter bridge can be measured by comparing the balance point of a known standard wire to the balance point of an unknown wire on the meter bridge. The difference in lengths between the two balance points is equal to the end correction.
When was Van meter Ford Stone Bridge created?
Van Metre Ford Stone Bridge was created in 1832.
