If you are referring to a thin interwoven layer of metal, usually brass or aluminium? This mesh absorbs electromagnetic interference that may warp or degrade the signal.
if it's a solid metal piece then it may be the 'electrical power carrier' and is integral for function.
No, a 0.75mm 2 core cable is not suitable for use with a 3 amp plug. The 3 amp plug typically requires a higher rated cable to safely handle the electrical current. It is important to use the correct cable size and rating to prevent overheating and potential electrical hazards.
10Base5 Ethernet cables use thick coaxial cable, also known as "thicknet." The cable classification for 10Base5 is RG-8 or RG-11.
To wire an RJ45 connector, you will need a crimping tool and a cable stripper. Strip about 1.5 inches of the outer jacket of the Ethernet cable, separate and arrange the internal wires in the correct order according to the wiring scheme (T568A or T568B), and insert them into the RJ45 connector. Finally, use the crimping tool to secure the wires in place.
For a 24 pair 1.5 mm sq cable, you would typically use a metric M40 size cable gland. This size provides enough room for the cable to pass through while maintaining a secure seal to protect against dust and moisture.
The maximum current that a 95mm cable can take would depend on the specific type or rating of the cable. Typically, a 95mm cable can handle currents ranging from 300 to 400 amps. It's important to consult the manufacturer's specifications or a qualified electrician to determine the exact ampacity rating for the specific cable in use.
The VGA cable that you would use to connect a laptop to a projector screen is called a PS2 projector cable.
Simplest way is to use a HDMI cable. I have a long cable reaching from my computer to my TV. I have to change the screen selection (Fn/F7) to select that screen.
no
Console cable of pbx system, it is a cable that will display the digital signal into monitor or screen or It is data cable that shows user interface for system configuration.
You need an Xbox 360 VGA cable.
No, you cannot directly use an Ethernet cable to transmit video from a computer to a TV. Ethernet cables are designed for network connections, not for video signals. To display a computer screen on a TV, you typically need an HDMI cable or other compatible video output method. Alternatively, you could use screen mirroring or streaming devices if the TV and computer support those features.
use data cable and connet it in led or lcd tv only. normal tv can not connect with data cable of tablets
Not necessarily. You can use satellite, fiber optics, and a broadcast antenna. It depends on what is available in your area.
For indoor or outdoor use with all types of SWA Cable--Provide for Environmental Seal in the Cable Outer Sheath. Also provide mechanical cable retention & electrical continuity.
If you use Optimum for both cable and internet, Optimum will provide a free wireless router. Their current package is the Cable Triple Play, and comes with a free wireless router and a link from your computer screen to your television screen.
you need something in which the cable at the back of your console can use to connect to your screen
Use the TV remote to change the TV back to the cable box.