answersLogoWhite

0

10Base5 Ethernet cables use thick coaxial cable, also known as "thicknet." The cable classification for 10Base5 is RG-8 or RG-11.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

How do you make 8 AWG stranded electrical cable?

To make 8 AWG stranded electrical cable, several strands of smaller gauge wires are twisted together to reach the required thickness. This stranding process provides flexibility and durability to the cable. Finally, the stranded wires are insulated and jacketed to protect them from environmental elements.


What is the temperature rating of non-metallic sheathed cable?

Non-metallic sheathed cable typically has a temperature rating of 60°C (140°F) for general use and 90°C (194°F) for certain applications. It is important to always check the manufacturer's specifications for the specific type of cable being used to ensure it is suitable for the intended application.


A four letter for a thick strong rope often made of metal?

cable


What is the Harmonized tariff number for locking nylon cable ties?

The Harmonized Tariff Schedule (HTS) number for locking nylon cable ties typically falls under the category of "plastic articles" and is often classified as 3926.90.9985 in the United States. However, the specific HTS number can vary based on the exact specifications and use of the product, so it's advisable to consult the latest HTS or a customs expert for precise classification.


What is a cable terminal?

A cable terminal is a hardware device that connects the end of a cable to a connecting point, such as a terminal block or another cable. It allows for the secure and reliable transfer of signals or power between cables or devices. Terminations can vary depending on the type of cable and the purpose of the connection.

Related Questions

Blank Ethernet uses thick RG8 coaxial cable with an AUI connector?

10base5


Does a 10Base5 Ethernet used twisted-pair cabling rated CAT-3 or higher and an RJ-45 connector?

No, 10Base5 uses coaxial cable (RG-6) with an F connector


What cable can be used to connect a transceiver to the cable in a thicknet network?

Thicknet coax cables are 10base5 cables, RG-8 or RG-6 cables.


What thickness cable require for 415 volt?

Voltage determines a cable's insulation thickness, not its conductor thickness (or, more accurately, its cross-sectional area). It's current that determines the csa of a conductor, not voltage.


What kind of wiring is commonly used in a bus topology?

A bus topology for a LAN will typically use coaxial cable, either 10Base5 (thicknet) or 10base2 (thin-net) copper wiring.


What is the actual loss of voltage in 100 meter length of cable?

It depends on the material of the cable (aluminum or copper) and the gauge of the cable. (Thickness). And on the current you intend it to carry.


How much does a cable weight?

The weight of a cable can vary depending on its length, thickness, and material. On average, a standard HDMI cable can weigh around 0.2-0.5 pounds per foot.


How do you you measure the thickness of a thin wire?

To measure the thickness of a thin piece of wire we have got the instrument called the wire gauge. The thickness of a thin piece of wire is measured in mm.


What is the maximum speed for Thicknet coaxial cable?

Thicknet coaxial cable, also known as 10BASE5, supports a maximum speed of 10 Mbps. It was primarily used in early Ethernet networks and can transmit data over distances of up to 500 meters. However, it has largely been replaced by more modern networking technologies that offer higher speeds and greater flexibility.


What is AWG in cable?

American Wire Gauge. Measure the thickness of the cable.


What is the maximum transmission distance for a network using 10base5 technology?

The maximum transmission distance for a network using 10Base5 technology, also known as "thicknet," is 500 meters (1,640 feet) per segment. This coaxial cable-based Ethernet standard supports data rates of 10 Mbps and allows for multiple segments to be connected, with up to 2,500 meters total distance when using repeaters. However, the effective distance for practical networking may be less due to the need for network devices and connectors.


What Ethernet in IEEE designates thinnet as?

In the IEEE standards, Thinnet is designated as 10BASE2. This specification refers to a form of Ethernet that uses coaxial cable with a maximum segment length of 200 meters and supports data rates of 10 Mbps. Thinnet is known for its thinner, more flexible cable compared to the original thick coaxial Ethernet (10BASE5), which allows for easier installation in various environments.