Coaxial cable is commonly used with several network protocols, but it is most notably associated with Ethernet protocols, particularly in older networking standards like 10Base2 and 10Base5. It can also be used for Cable Television transmission and other forms of data communication. The cable's design helps reduce interference, making it suitable for transmitting data over medium to long distances.
Uses of Coaxial Cable?
To convert a coaxial cable signal to an Ethernet signal, you can use a device called a coax-to-Ethernet adapter or a MoCA (Multimedia over Coax Alliance) adapter. This device connects to the coaxial cable and translates the RF signal into Ethernet data, allowing you to connect it to your router or network device via an Ethernet cable. Simply connect the coaxial cable to the adapter, then use an Ethernet cable to link the adapter to your network hardware. Ensure that the adapter is compatible with your internet service provider's coax signal.
Echo-back interferes with the original signal
no.
Instrumentation cable carries a digital protocol such as devicenet, profibus, foundation fieldbus or even ethernet. Compared to regular hard wired devices that would use coaxial cables.
coaxial cable has a solid copper or copper-clad-steel centre conductor surrounded by a non-conductive dielectric insulating material. The dielectric is surrounded by foil shield/s and/or copper braid/s which form the outer conductor and also shield against electromagnetic interference (EMI). The outer conductor/shield is encased in a PVC jacket.
No, not all coaxial cables are suitable for internet connection. It is recommended to use a high-quality coaxial cable specifically designed for internet use to ensure optimal performance and reliability.
Use T Connector
Coaxial cable, STP cable, UTP cable
A coaxial cable has great uses in television antenna connections. TV satellite connections also use coaxial cables to connect decoders to the TV set.
Network Control Protocol is uses to identify the Network layer protocol used in the packet
You should use an RG-6 cable RG-6 A type of coaxial cable with an impedance of 75 ohms and that contains an 18 AWG core conductor. RG-6 is used for television, satellite, and broadband cable connections. Source = Network+ Guide to Networks (Fifth Edition) by Tamara Dean