0
What else can I help you with?
Why don't bathroom ceiling light go on or off when there is voltage coming from the switch to the fixture?
This could be due to a faulty light fixture, a wiring issue, or a problem with the switch itself. It is recommended to check the wiring connections, test the switch, and if necessary, replace the fixture if it is damaged. If unsure, it may be best to consult a licensed electrician for proper diagnosis and repair.
Why does the light fixture crackle when you first turn on the lights then Stops after 10-15 seconds?
The crackling noise could be due to the expansion and contraction of the materials in the light fixture as it heats up. Once the fixture reaches a stable temperature, the noise subsides. This is a common occurrence in older or poorly maintained fixtures. If the issue persists or becomes more frequent, it may be a sign of a loose connection or faulty wiring that should be inspected by a professional electrician.
Can you remove an outlet or hard wired fixture from a circuit for troubleshooting a GFCI I that won't reset?
Shut the GFCI off at the panel breaker. You can remove the down stream load right at the GFCI. Then reapply the power and keeping your fingers clear of the wire terminals, trip the GFCI and reset it. If it stays reset the trouble is down stream from the GFCI. To trouble shoot down stream remove all plugged in devices and try a reset. If still no reset remove the hot wire in the hard wired fixture and try for a reset. If still no reset buy a new GFCI.
What would cause loss of power to the wires in the ceiling for a light fixture if the breaker is not tripped?
Bad ground connection. Corrosion on wire. Broken or cracked wire. Bad Switch. Mouse chewed through wire. just a guess but it may be faulty wiring in the fixture itself you can try to figure it out first try to problem solve it.did you replace an older one?is it a new fixture?did it work before or after you replaced it?andis it a fairly old one?you can replace it as a last resort.
What if your ceiling light does not work although there is power to the live wire?
If there is power to the live wire but the ceiling light is still not working, the issue may lie with a faulty light bulb, a bad connection between the wire and the fixture, or a defective switch. Try replacing the bulb first, then check the wiring connections and the switch to ensure they are functioning properly. If the problem persists, it may require further inspection by a professional electrician.
Why is my light fixture buzzing?
Your light fixture may be buzzing due to loose wiring, a faulty bulb, or a dimmer switch that is not compatible with the fixture. It is important to address this issue promptly to prevent any potential safety hazards.
If the water in the shower runs cold or extremely hot in approx 5 minutes is it a plumbing or a fixture issue?
Its a medical issue, for the person using it. A plumbing issue, me thinks.
Why is my dome light fixture not unscrewing, and how can I fix this issue?
Your dome light fixture may not be unscrewing due to a stuck or stripped screw. To fix this issue, you can try using lubricant, a rubber band for better grip, or a screw extractor tool. If these methods do not work, you may need to seek professional help to remove the fixture safely.
What should I do if the pull chain came out of my light fixture?
If the pull chain came out of your light fixture, you can try to reattach it by opening the fixture and securing the chain back in place. If you are not comfortable doing this yourself, consider contacting a professional electrician to help fix the issue.
Why does the light fixture still have power when the switch is turned off?
When a light fixture still has power when the switch is turned off, it could be due to a wiring issue where the switch is not properly cutting off the power supply to the fixture. This can happen if there is a faulty switch, a loose connection, or a short circuit in the wiring. It is important to have a qualified electrician inspect and repair the issue to prevent any safety hazards.
Why are my light bulbs flickering and how can I fix this issue?
Flickering light bulbs can be caused by loose connections, faulty wiring, or a problem with the light fixture. To fix this issue, try tightening the bulb, checking the wiring, or replacing the fixture if needed. If the problem persists, consult a professional electrician for further assistance.
Why is my light flickering and how can I fix it?
Your light may be flickering due to a loose bulb, a faulty fixture, or an issue with the electrical wiring. To fix it, try tightening the bulb, checking the fixture for any damage, and ensuring the wiring is properly connected. If the issue persists, consult a professional electrician for further assistance.
Why does the significance level differ among industries?
Safety issue.
Why does significance level differ among industries?
Safety issue.
Why is water dripping through the light fixture in the ceiling?
Water may be dripping through the light fixture in the ceiling due to a leak in the roof or plumbing system above the fixture. This can cause water to seep through and accumulate in the light fixture, leading to dripping. It is important to address this issue promptly to prevent further damage and potential safety hazards.
Why is my light fixture leaking water?
Your light fixture may be leaking water due to a roof leak, condensation buildup, or a plumbing issue. It is important to address this promptly to prevent further damage and ensure safety.
How can I fix a light fixture that is hanging from the ceiling?
To fix a hanging light fixture, first turn off the power to the fixture at the circuit breaker. Then, use a ladder to access the fixture and check for any loose screws or connections. Tighten any loose parts and replace any damaged components. If the issue persists, consider calling a professional electrician for further assistance.
