As much as someone is willing to psy
To determine the fuse size for a 200 watt amp, you will need to divide the power rating by the voltage of the system. If the amp operates on a 12V system, the amperage would be around 16.67A, so a 20A fuse would be appropriate for a 200 watt amp.
Yes it should be all right. Ratings for amp/speakers are approximate but as a rule it is preferable for the speaker to be rated higher than the amp.
Not unless the device is running at less than 333 volts.
Yes, a 1200 watt amp can power a 300 watt box. The wattage of the amp refers to its maximum power output, so it can deliver up to 1200 watts if needed. As long as the amp is set up properly and not pushed to its maximum capacity, it can safely power a 300 watt box.
Yes, a 1200 watt amp can provide good bass for 2 Kicker CVR 12-inch subwoofers. Make sure to set the amp gain correctly, match the impedance of the subwoofers with the amp, and use a proper enclosure for optimal performance.
To determine the fuse size for a 200 watt amp, you will need to divide the power rating by the voltage of the system. If the amp operates on a 12V system, the amperage would be around 16.67A, so a 20A fuse would be appropriate for a 200 watt amp.
YES! it won't reach it's peak, but that's also probably a good thing, cause it'll be harder to blow your sub. i prefer to buy either the exact watt match for my subs and amp, or buy the next lower watt amp from my subs
Yes it should be all right. Ratings for amp/speakers are approximate but as a rule it is preferable for the speaker to be rated higher than the amp.
bridge amp run 1 sub it will hit deeper and harder start adjusting with gain all the way down
To charge a 200 amp-hour battery with a 1000-watt solar panel, you first need to convert the amp-hours to watt-hours. A 200 amp-hour battery at 12 volts has 2400 watt-hours (200 Ah × 12 V). If the solar panel operates at peak efficiency, it can produce about 1000 watts, which means it would take approximately 2.4 hours of peak sunlight to fully charge the battery (2400 watt-hours ÷ 1000 watts). However, considering factors like inefficiencies and varying sunlight, it may actually take longer in practice.
well you hook it up
You need at least 5 volts to power it? What's the real question?
Not unless the device is running at less than 333 volts.
The equation that you need to use is I = W/E. Amps = Watts/Volts. As you can see there is no voltage stated but when you obtain the voltage value use it in the equation.
1200 Watt wiring is more than enough for an 800 Watt amp. The rating of the sub doesn't make any difference to the cables. If you want to use the sub to its rated power you should get a bigger amp. If the amp can only give out 800 Watts and the sub can take 1100 Watts then you can put a bigger amp on. It is still going to be loud as with an 800 Watt amp. I have a 300 watt amp with a 1200 Watt sub and people hear me coming.
With 600 watts, you can't really go too big, and if you only have one amp, you can't go with separate mids/highs and a sub, so personally, I would try to find a pair of 200 watt speakers that have nice tweeters, mids, and lows, all in one. Don't go for anything over 200 watts each, because you want to leave room on your amp. You don't want to get two 300 watt speakers, because your amp will be working at full power, which isn't good for it or your new speakers. So all in all, a nice pair of 200 watt full range speakers is what I would be looking for.
Any amp will power a 15" sub. What you need to know is what is the RMS of the 15" sub. Lets say its 200 watts RMS than you will want a max of 200 watts for your amp.