0
In North America the voltage ratings of low voltage wire comes in three voltages. The voltages are 300, 600 and 1000 volt insulation ratings.
What else can I help you with?
How do you calculate the cable size for a run of 30 meters?
to calculate the cable size of a run of 30 meters long you first will have to know the current of the appliance use the voltage drop formula V d = (mVxIxL)/1000 once the voltage drop is less than 2.5% of the nominal voltage, the cable should be upsize.
What is the cable size for 700 amps?
The cable size for 700 amps depends on several factors, including the type of cable (copper or aluminum), the installation method, and the permissible voltage drop. Generally, for copper conductors, a cable size of around 2/0 AWG to 3/0 AWG is commonly used, while for aluminum conductors, sizes may range from 250 kcmil to 300 kcmil. It's essential to consult the National Electrical Code (NEC) or a local electrician for precise requirements based on specific conditions.
Do you need REM cable to power up amp?
Yes, you need a cable to connect the power supply to the amplifier, but the specific type of cable required depends on the model and power requirements of the amplifier. In most cases, a standard power cord with the appropriate voltage and current rating will suffice. It's always recommended to refer to the amplifier's user manual for the correct power supply requirements.
How many amps 95mm cable could take?
The maximum current that a 95mm cable can take would depend on the specific type or rating of the cable. Typically, a 95mm cable can handle currents ranging from 300 to 400 amps. It's important to consult the manufacturer's specifications or a qualified electrician to determine the exact ampacity rating for the specific cable in use.
What is the maximum temperature rating of type xhhw insulation when used in a wet location?
The maximum temperature rating for XHHW insulation when used in a wet location is typically 75°C (167°F). This rating is applicable to copper conductors. For aluminum conductors, the maximum temperature rating is usually 60°C (140°F) in wet locations. Always refer to the National Electrical Code (NEC) or manufacturer specifications for precise guidance.
What is the maximum voltage rating for AC-90 armoured cable?
The maximum voltage rating for AC-90 armored cable is typically 600 volts. This type of cable is designed for use in various applications, including building wiring and power distribution, and is suitable for both indoor and outdoor installations. It's important to ensure that the cable is used in accordance with local electrical codes and standards.
Which type of capacitor has the highest voltage rating?
Those with vacuum as the dielectric have.
How do you calculate the cable size for a run of 30 meters?
to calculate the cable size of a run of 30 meters long you first will have to know the current of the appliance use the voltage drop formula V d = (mVxIxL)/1000 once the voltage drop is less than 2.5% of the nominal voltage, the cable should be upsize.
Do you derate for a three phase line and load conductors in the same conduit?
Yes, there will be a de-rate applied to this type of installation. In the electrical code book the amperage rating of conductors is for allowable ampacities for not more than three copperconductors in raceway or cable. This is based on an ambient temperature of 30 degrees C. If the ambient temperature of the conductors where the raceway is installed is over 30 degrees C the conductor amperages have to be reduced. Where the number of conductors are from 4 to 6 conductors in a raceway, the conductors amperage has to be reduced by .8
What is cable schedule?
Cable schedules provided a tabulated list of all cables with relevant details such as cable number, cable type, size and rating, voltage, number of cores and length of route. Cable schedules are applicable for power cables, control cables, instrumentation cables and industrial data communication cables. In addition to the cable schedules, termination diagrams are provided for use by the electrical installation contractor.
What type of conductor should be used for wiring on fixture?
The conductors on and in the lighting fixture should have an insulation rating of 105 degrees C. The supply conductors to the junction box that the fixture is hung from or connected to should have an insulation rating of 90 degree C.
What is the capacity of a 35mm2 cable?
Current carrying capacity is different for aluminum from that of copper cable. Under different conditions like, type of insulation, number of conductors, in conduit, underground, in air, single or multilayer, system voltage, the current carrying capacity varies a bit. Hence You must refer a standard chart from a reputed cable company.
What is the cable size required for a 390 amp load?
The required cable size for a 390 amp load depends on several factors including the type of insulation, temperature rating, length of the run, and whether the installation is in a conduit or exposed. Generally, for copper conductors, a cable size of at least 250 kcmil is often recommended; for aluminum conductors, a larger size may be necessary, typically around 350 kcmil. It's crucial to consult the National Electrical Code (NEC) or a local electrical code for precise calculations and to account for factors like voltage drop and ambient temperature. Always consult with a qualified electrician or engineer for specific applications.
What is the difference between type ac and type act armored cable?
The difference is the type of insulation on the conductors. Type AC used a thermoset insulation , Type ACT is a theromplactic insulation.
How can you select cable gland for a 240 sqmm cable?
It depends to Overall Diameter, type of armor, Lead Cover and voltage grade.
What is zip cord?
Zip cord is a type of plastic insulated wire having 2 or more conductors. These conductors can be easily separated by manually "unzipping" the cord along a molded indentation between conductors. Zip cord with a large number of conductors is usually called ribbon cable.
Does a high rating mean lots of insulation or little insulation?
It depends what you mean by a 'high rating'!If you mean a high 'voltage rating' then, yes, you will require thicker insulation. But if you mean a high 'power rating', then, not necessarily, because the voltage can be low, while the current is high.Remember, the thickness of insulation depends on the voltage, while the type of insulation (how it withstands higher temperatures) depends on the current.
