water line? half inch or three quarters
Standard pipes can be made of copper, steel, lead, polyurethane, and other materials.It would depend on what the pipe is made of.It would also depend on the thickness of the walls of the pipe."Standard" is also ambiguous since different applications have different standards. A gas pipe is different than a sewage pipe or a fresh water pipe.
It depends on how much each pipe can hold. And how long each pipe is.
This pipe will hold 1,468.8 gallons of water.
A water pipe bursting is a physical reaction. It does not involve any chemical changes in the water itself, but rather a physical change in the structure of the pipe, causing it to break and release the water inside.
It is not recommended to boil a water pipe as it can damage the material and potentially release harmful chemicals. Instead, clean the water pipe regularly with isopropyl alcohol and salt to remove residue and buildup.
When the handle is in line with the pipe, the valve is open.
No, it's not standard pipe thread.
Supply coming from water source is a water service line.
There is no obvious reason why there should be any water in the pipe. Furthermore, there are no units associated with the width of the pipe, so its volume cannot be calculated.
standard wt of 75 mm pipe with 4 mm thk
There are different standards depending on where you are. BSP, which is British Standard Pipe thread, is a fine thread used as an international standard
Yes, be sure to pipe floor drain line properly into water closet piping.
yes any pipe will
measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe
what is the color code for all the pipeline used in standard hotel industry
because the pipe line broke
Repairing the section of pipe that is leaking will stop a leak on a hot water line.