The most common metal used for edge connectors is gold. Gold is preferred due to its resistance to corrosion and ability to provide a reliable electrical connection.
A split-ring connector is a metal ring with prongs that penetrate into the wood to hold the timber together. It is often used in timber framing to join beams or trusses. The split-ring connector is hammered into pre-drilled holes in the wood, creating a strong and durable connection.
After looking for myself, the only electrical 'butted seam' I can find is in regards to the construction of the actual crimp-on connectors. A butted seam here means that the sleeve of the connector (where the wire goes) is not forged of one continuous piece of metal; rather, it is a flat piece of metal rolled into a cylinder, giving it a 'butted seam' where the two ends meet each other. This is in comparison to a connector made with no seams, i.e. forged in a mold. etc. The connectors for high voltage/high amperage connections (like a pole mount transformer) are made solid like this. ------------------- Original answer: I'd actually need to know in what context you heard that term. Assuming you mean an electrical butt connection, that would be two wires connected at the ends by inserting each into an insulated butt connector, and crimping the connector onto both wires. If this isn't what you mean, you would need to ask with context. Please update the discussion area for this question to add context, or ask a new question.
This metal is iron.
metal screws
A smooth-edge can opener is designed to cut along the lid's seam without leaving sharp edges or metal shavings. These can openers have a safer design that minimizes the risk of metal shavings contaminating food.
Usually used as a floppy drive interface.Also the TRS-80 Model 3 used this connector for its printer connector.
Metal Edge ended in 2009.
Metal Edge was created in 1986.
Gold and Tin
Their winning edge was chariots.
A bandsaw is a powerful piece of equipment which uses a blade consisting of a continuous band of metal with teeth along one edge, and is used for cutting metal.
52
A metal burr is a small, thin edge of metal that is created when a piece of metal is machined. For example: when a chef's knife is sharpened, a thin piece of metal remains on the edge of the knife.
A split-ring connector is a metal ring with prongs that penetrate into the wood to hold the timber together. It is often used in timber framing to join beams or trusses. The split-ring connector is hammered into pre-drilled holes in the wood, creating a strong and durable connection.
It is between the steering column and the hood release lever just under the edge of the lower dash trim. It is a black connector.
Connector strips are tools used in electrical wiring to connect multiple wires together in a secure and reliable manner. They typically consist of a row of metal terminals where wires can be inserted and secured using screws or other mechanisms. Connector strips are commonly used in junction boxes or control panels to organize and simplify electrical connections.
This is a connector used in serial and parallel ports.