Gypsum
Talc can scratch Talc , although Talc's hardness varies it is considered a soft mineral, that can even be scratched with a finger nail. Any mineral or material with a hardness equal to or greater than 1 on the Mohs hardness scale will be able to scratch talc. Talc is the softest mineral listed on the Mohs scale, listed as a 1 on the scale which is graded from 1 through 10, with 10 being the hardest (diamond).
Yes
Talc can scratch gypsum, but can be scratched by all other minerals. Talc is the softest mineral on the Mohs scale, with a hardness of 1, making it easily scratched by minerals with higher hardness values. Gypsum has a Mohs hardness of 2, so talc can leave a mark on it.
No.because calcite is softer then feldspar
Amber is a fossilized tree resin that has a hardness of about 2 to 2.5 on the Mohs scale, while talc is the softest mineral at a hardness of 1, allowing amber to easily scratch it. In contrast, calcite has a hardness of 3, making it harder than amber, which is why amber cannot scratch calcite. This difference in hardness explains the scratching ability of amber in relation to these two minerals.
Talc can scratch Talc , although Talc's hardness varies it is considered a soft mineral, that can even be scratched with a finger nail. Any mineral or material with a hardness equal to or greater than 1 on the Mohs hardness scale will be able to scratch talc. Talc is the softest mineral listed on the Mohs scale, listed as a 1 on the scale which is graded from 1 through 10, with 10 being the hardest (diamond).
A penny would scratch minerals with a lower hardness rating such as calcite, gypsum, or talc. Minerals like quartz or topaz would not be scratched by a penny because they are harder than the metal in a penny.
The most commonly known mineral that can be scratched with a fingernail is talc.
You can tell if a mineral can scratch another mineral by performing a scratch test, where you use the hardness scale to compare the minerals. If the mineral you are testing can scratch the other mineral, then it has a higher hardness on the scale.
Yes
The hardness of a mineral is categorized on the Mohs hardness scale with talc as 1 and diamond as 10. A mineral can only be scratched bya mineral that is as hard or harder than the first mineral. So talc can scratch talc but nothing else. A diamond can scratch every other mienral including itself. Cordundum with a hardness of 9 can't scratch diamonds but can scratch a lot of other minderals.
Talc is the mineral that cannot scratch any mineral by itself. It has a Mohs hardness of 1, making it the softest mineral on the Mohs scale, which means it can be easily scratched by all other minerals.
Fluorite with a Mohs hardness of 4 would be scratched by quartz (with a hardness of 7). Both calcite (Mohs hardness 3) and talc (Mohs hardness 1) are softer than fluorite.
The most commonly known mineral that can be scratched by a fingernail is talc.
Talc can scratch gypsum, but can be scratched by all other minerals. Talc is the softest mineral on the Mohs scale, with a hardness of 1, making it easily scratched by minerals with higher hardness values. Gypsum has a Mohs hardness of 2, so talc can leave a mark on it.
apatite with a steel knife feldspar with window glass
No.because calcite is softer then feldspar