AWG # 6 copper or AWG # 4 aluminum
If you are talking about splicing a 40 amp cook top into an existing 3C #10 30 amp circuit then the answer is no. An appliance with that load ampacity needs to have its own dedicated circuit. This would consist of 3C #8 wire cable fed from a two pole 40 amp breaker located in the distribution panel.
An electric oven is a small microwave size item that functions the same as an oven, but is smaller might add that it is portable, which means that you can carry it around from different places wouldn't bring it with you everywhere because there is a chance there will be an accident, such as you dropping it.
No, you should not connect a bare wire from the cooktop to a green wire in a box. The green wire is typically the grounding wire and should be connected to the grounding system in the electrical installation. It's recommended to follow the manufacturer's guidelines and consult a qualified electrician for proper installation.
If your electrical service is only 120 volts you have a problem. There is no way that you can connect a 240 volt cook top to that service. You have two options, one is to upgrade to a new 120/240 volt electrical service. Your other option is to find a 120 volt electrical cook top.
NO, 10ga has a max of 30 amp, you need 8ga, you should get 8/3wgr, That is 4 wires 2-hot, 1- neutral,1-ground, some appliance's have a ground strap so if the wire only has 3 then you can omit the neutral. But new code is, if installing new wire, must have neutral and ground. Old style- 2-hot,1- neutral. New- 2-hot, 1- neutral,1-ground.
Yes
i need info on how to conect the wirin ,on an electric cook stove. the wires on the stove are red green and black
The answer depends on how much power the cook top requires and whether one phase would be able to supply that amount of power.
There is really no difference, but is more of a personal preference. The flat top is easier to clean.
I remember you use to place a thick wire type triangle on top of the burner
It goes directly to the back of the top of the alternator.Easy
To use a stove top griddle on an electric stove, make sure the griddle is flat and fits the burner size. Preheat the griddle on medium heat, and use a little oil or butter to prevent sticking. Cook in batches for even heating, and clean the griddle after each use to maintain its quality.
An electric hob is effectively a stove top with elements on it. When used for cooking one can put a pot or pan on top and fill with water or just use a little oil to cook various foods.
If you are talking about splicing a 40 amp cook top into an existing 3C #10 30 amp circuit then the answer is no. An appliance with that load ampacity needs to have its own dedicated circuit. This would consist of 3C #8 wire cable fed from a two pole 40 amp breaker located in the distribution panel.
The coiled wire on top of a light bulb that gets hot when electricity passes through it is called a filament. It is typically made of tungsten, which has a high melting point and can withstand the high temperatures generated by the electric current.
GE Smooth Cook-Top Electric Range is consist of four circles of two different sizes which light up when in use to let you know that it is still hot.
It connects to the back of the alternator towards the top.