Alluminium ans Steel
Mercury and Sulfur
No, plasterboard, also known as drywall or gypsum board, is not made from metals. It is primarily composed of a core made of gypsum (a mineral) sandwiched between two sheets of heavy paper or fiberglass. Some variations may include additives for enhanced properties, but metals are not a component of standard plasterboard.
The two patterns include metals and non-metals. metals are placed on left and non-metals on right side.
An alloy is a compound made of two or more different metals. Alloys often have improved properties compared to pure metals, such as increased strength or corrosion resistance. Examples of alloys include bronze (copper and tin) and stainless steel (iron and chromium).
Electricity i.e. a battery, can be made by taking two different metals (maybe that's where your confusion came in) - for example, copper and zinc, and submerging them into a an acid solution (like vinegar). Or you can take those same to metals and stick them into a lemon. If you put a volt meter on the two different metals you will measure a small, but noticeable, current. But to answer your queston, you will not make electricity by rubbing two pieces of metal together.
Which one? Statues were (most typically) either carved from blocks of stone or cast from precious metals. Sometimes combinations of the two.
Metals; and alloys are made of two or more metals.
it is made by two or more metals come together.
two and one for the tranny. three total
An alloy
it is made by two or more metals come together.
Iron and Aluminum
A bimetallic strip is made up of two different metals and is commonly found in thermostats. When the temperature changes, the bimetallic strip bends due to the different rates of expansion of the two metals, which helps control the thermostat.
Metals come from two different places. Most come from the earth they are natural metals other can be mixes of these metals called alloys. If you look at the periodic table you will see a separate section of the table usually below that has all the man made elements but only a few of these are man made metals. This is a brief answer.
A cylinder
it is made up of two non-metals
Alloys are made by mixing two or more metals together to create a new material with improved properties. This is usually done by melting the metals together and then allowing them to cool and solidify. The proportions of each metal in the alloy can be carefully controlled to achieve specific characteristics like strength, durability, or corrosion resistance.