Just like any other material, it gets warmer, most likely expands, and may
transition from solid to liquid and/or from liquid to gas. If it's already in the
gaseous state, then its pressure increases.
Its rate of radioactive decay is not affected.
The material in the asthenosphere rises when heated because of its reduced density. As it absorbs heat, the material becomes less dense compared to the cooler surrounding rocks. This buoyant force causes the heated material to rise towards the surface.
When heated, the drilled hole in a sheet of aluminum will expand due to thermal expansion. This expansion occurs because as the temperature of the aluminum increases, the atoms vibrate more vigorously, causing the material to expand.
No, cling film is not a thermosetting material. Thermosetting materials are plastics which harden irreversibly when heated, while cling film is a thermoplastic material that softens when heated and hardens when cooled.
It would evaporate
A tiny fragment of heated material is called a spark. Sparks are small, glowing particles that are ejected from a fire or when striking two hard surfaces together.
nothing , after a while the flask material will break down
The increase in volume of a material when heated is called thermal expansion.
The material in the asthenosphere rises when heated because of its reduced density. As it absorbs heat, the material becomes less dense compared to the cooler surrounding rocks. This buoyant force causes the heated material to rise towards the surface.
As copper is heated, its resistance increases. This is due to the increase in collisions between free electrons and copper ions, hindering the flow of electric current through the material.
no answer
expand
It will evaporate.
it evaporates
it will melt
Sedimentary rock is not original source material, its rock that got ground into sand, settled (usually under water), got buried, and then got heated and squeezed back into a form of rock. Lots of sources.
When heated, the drilled hole in a sheet of aluminum will expand due to thermal expansion. This expansion occurs because as the temperature of the aluminum increases, the atoms vibrate more vigorously, causing the material to expand.
When a material is heated, the particles within the material gain energy and vibrate more rapidly. This increased movement causes the particles to push farther apart, which can result in the material expanding or getting bigger.