The tension on the blades of the cord cap to the receptacle does not have enough pressure to make a good connection. Whenever a receptacle feels loose when you plug an appliance into it, change the receptacle out for a new one. This will prevent the condition you state from happening.
If you do it will burn the winding immediately and make the fan inoperable. So, No, don't plug in ANY 12VDC device into a 120 outlet.
Yes, I see no reason this couldn't be done. But first, make sure the current drawn by the heater is 80% or less than the rating of the circuit and outlet. As for connecting a cord to this heater, that, too, should be a simple matter. I would look for what we call a knock-out, which is a hole punched but not yet removed from the area where electrical connections are to be made. You will need to buy a NM cable connector large enough for the cable. If there is no knock-out or if it is not large enough for the connector you need, you can hole-saw a hole to the size you need. If there is not room to do this cleanly then you should contact a competent electrician for more specific advice.
No, it is not safe to use acetone in a kerosene heater. Acetone is a highly flammable liquid that can ignite easily and produce harmful fumes when burned. Kerosene heaters are designed to burn kerosene, which has specific properties that make it suitable for use in these heaters. Using acetone in a kerosene heater can pose serious safety risks and should be avoided.
No, you cannot directly get 220 volts from a 120-volt outlet. You would need a transformer or voltage converter to step up the voltage. Make sure to use the appropriate equipment to avoid damaging your devices or creating a safety hazard.
To make your space heater hotter, you can try increasing the heat setting on the heater if it has adjustable settings. Make sure the heater is clean and free of debris, as this can affect its efficiency. Additionally, placing the heater in a smaller, enclosed space can help it heat up the area faster.
No it will not. It will either be leaking or become clogged which will make the heater not produce any heat. it has nothing to do with fuel mileage.
If you do it will burn the winding immediately and make the fan inoperable. So, No, don't plug in ANY 12VDC device into a 120 outlet.
When installing a water heater outlet, it is important to follow these safety precautions: Make sure the power supply is turned off before starting the installation to prevent electric shock. Use proper tools and equipment to avoid accidents and injuries. Ensure the area around the water heater outlet is clear of any flammable materials to prevent fires. Follow the manufacturer's instructions carefully to ensure proper installation and avoid damage to the water heater. Check for any leaks or gas odors after installation to prevent potential hazards. By following these safety precautions, you can ensure a safe and successful installation of a water heater outlet.
Portable heaters are safe to use in the manner written on the heaters instructions. Some portable heaters are meant for use outdoors only, so using those heaters indoors would not be safe. The other thing to consider with heater safety is do you have children who might accidentally touch the heater, if you do you need to make sure that your heater does not heat up enough to burn the child. Also, its important to make sure that your house's electrical system is properly grounded so that your portable heater, if it is electrical, does not short out.
no, becausev you would not be able to plug it into the outlet
No! Thermostat.
Yes, I see no reason this couldn't be done. But first, make sure the current drawn by the heater is 80% or less than the rating of the circuit and outlet. As for connecting a cord to this heater, that, too, should be a simple matter. I would look for what we call a knock-out, which is a hole punched but not yet removed from the area where electrical connections are to be made. You will need to buy a NM cable connector large enough for the cable. If there is no knock-out or if it is not large enough for the connector you need, you can hole-saw a hole to the size you need. If there is not room to do this cleanly then you should contact a competent electrician for more specific advice.
To remove the heater core from a 1998 WF Ford Festiva, first, disconnect the battery and drain the cooling system. Remove the dashboard and the center console to access the heater box. Then, detach the inlet and outlet hoses from the heater core, unscrew any retaining screws, and carefully pull the heater core out of the heater box. Make sure to replace any seals or gaskets upon installation of the new core.
No. Oxygen is not part of Jupiter's make-up.
The year, make and model info would help but generally the heater blower motor resister is located close by the heater blower motor.
An electric wall heater can be placed anywhere. Make sure there is 2 feet of space in front of the heater to avoid fires. Place the heater where there is not much foot traffic so there won't be any danger of it being tipped over. Also if you have small childen consider putting it where they won't have access to it as it can burn them.
Not knowing what year, make and model you have, I would suspect the heater fan switch and or electrical plug to the switch is at fault.