A blue wire can be used as a neutral wire when it is specifically designated for that purpose in a country's electrical code or when it is identified as such by markings or labeling. It is important to always follow local electrical codes and regulations when using wiring for safety reasons.
In electrical wiring, the live or "hot" wire is typically brown or red, the neutral wire is typically blue or black, and the ground wire is yellow or green. So, in this case, the brown wire is likely the hot wire, the blue wire is the neutral wire, and the yellow green wire is the ground wire.
The colour of the neutral wire in Australia is blue with marking N.
In the UK Brown is the live, blue is the neutral and green/yellow is the earth. The live and neutral are the two wires that normally carry the current.
Test the wire with a meter to determine which wire is your hot, which is your neutral, and which is your ground. Those colors are indicative of a 240v circuit normally, so you may have two hots and a ground. Other wise Hot=Black, Neutral=White, and Ground=Green for placement. On your plug, Black/Hot goes to the brass colored terminal. Green/ground goes to the sometimes green terminal that is off by itself usually at the bottom of the receptacle. The neutral goes to the silver terminal.
In Bangladesh, the live wire is typically red, brown, or black; the neutral wire is typically blue or black; and the ground wire is typically green or green with a yellow stripe. It is important to consult with a local electrician or electric code regulations for accurate information.
In electrical wiring, the live or "hot" wire is typically brown or red, the neutral wire is typically blue or black, and the ground wire is yellow or green. So, in this case, the brown wire is likely the hot wire, the blue wire is the neutral wire, and the yellow green wire is the ground wire.
In the UK the neutral wire is 'blue'.
The colour of the neutral wire in Australia is blue with marking N.
neutral
These colour wires are used in European and UK wiring. The blue wire is used to the identify the neutral conductor and the brown wire is used to identify the "hot" conductor.In Canada and the US. The white wire is used to the identify the neutral conductor and the any colour but green is used to identify the "hot" conductor.
The blue wire is typically used as the neutral wire in electrical wiring systems, providing a return path for the current. The brown wire is usually used as the live wire, carrying the current to the appliance or device.
No
In an electrical circuit, the white wire is typically used as the neutral wire.
In the UK Brown is the live, blue is the neutral and green/yellow is the earth. The live and neutral are the two wires that normally carry the current.
Yes, the white wire is typically used as the neutral wire in electrical wiring.
In an electrical circuit, the white wire is typically used as the neutral wire, not the hot wire.
The green and yellow is the earth wire The brown is the live wire The blue is the neutral wire A poem to help is: The brown live cow drinks from the blue neutral water and eats the green grass from earth