In Bangladesh, the live wire is typically red, brown, or black; the neutral wire is typically blue or black; and the ground wire is typically green or green with a yellow stripe. It is important to consult with a local electrician or electric code regulations for accurate information.
In a panel box, the neutral wire is typically white or gray. It is important to follow standard color-coding practices to ensure proper wiring and safety in electrical systems.
Black in a black/red/green set, or blue in a blue/brown/green set. The hot is red or brown and the earth is green (note: I'm in New Zealand and assuming that the colors are the same).
For wiring in the USA the Neutral conductor is required to be white or gray by the National Electrical Code.
The black wire originating from a breaker box or fuse box is the live wire. However, in certain cases, the grey (or white) neutral wire can also be live. For example, the black wire may feed a lighting outlet, and if the neutral wire is broken on its way back to the neutral bar in the panel, then the neutral wire from the lighting outlet will be hot, because there is an electrical path from the black wire, through the light, and to the neutral. The point is, always check with a voltmeter before assuming the white or grey wire is not live.
The neutral wire is typically colored white or gray.
In the UK the neutral wire is 'blue'.
Red
they are neutral they are not owned by anyone
In Bangladesh, the live wire is typically red, brown, or black; the neutral wire is typically blue or black; and the ground wire is typically green or green with a yellow stripe. It is important to consult with a local electrician or electric code regulations for accurate information.
In a panel box, the neutral wire is typically white or gray. It is important to follow standard color-coding practices to ensure proper wiring and safety in electrical systems.
Black in a black/red/green set, or blue in a blue/brown/green set. The hot is red or brown and the earth is green (note: I'm in New Zealand and assuming that the colors are the same).
Not only in BC but in all of North America, the colour for a neutral wire is white.
The wire color indicates what type of voltage the wire is carrying. Color coding is important for safety because the live, neutral and earth wires must never be confused. Color codes differ between Europe and USA etc.
For wiring in the USA the Neutral conductor is required to be white or gray by the National Electrical Code.
The year, make and model would help.
A neutral wire in an electrical circuit is typically identified by its white color. It is also connected to the wider prong on a standard electrical outlet. Additionally, a voltage tester can be used to confirm if a wire is neutral by checking for a voltage reading close to zero.