the element has a open in it !
Valence electrons determine the reactivity of the element.
It will increase the current since the water heater is made of a heating element and which is resistive in nature. Ohms law states that V=IR where V is the voltage, I the current and R the resistance. Now the resistance will always remain constant. Thus, when the voltage is increased, the current will also increase.
The best element to use is a 3 phase electric heater that has a guard over the element protecting you from brushing against the hot part and stopping the element from starting a fire if the heater is pushed element down onto the floor
No. For an example using a 3500 watt element. The amperage through the element will be I = W/E, 3500/120 = 29 amps. The resistance of this 3500 watt element will be R = E/I, 120/29 = 4.13 ohms. Now using the 200 volts and finding the amperage I = E/R, 200/4.13 = 48 amps. The new wattage of the element has become W = A x V, 48 x 200 = 9600 watts. The element will not stand the increase in amperage and will burn open. To operate on 200 volts and still have a 3500 element in the tank you will have to find an element with a resistance of 12 ohms. I = W/E, 3500/200 = 17 amps. R = E/I = 200/17 = 12 ohms. This is a resistance three times more than the 120 volt element to achieve the 3500 watt rating.
The number of protons determine which element an atom is and normally the number of electrons is equal to it. Strip an electron off an iron atom and you have an ionised iron atom.
Calcium has 20 Protons. You can determine the amount of Protons in an Element by checking the top number of an element. This is called the Atomic number. Calcium has 20 protons
Common issues that can arise with an electric stove oven element include uneven heating, element not heating up, or element burning out. These issues can be resolved by checking for any visible damage to the element, ensuring it is properly connected, and replacing the element if necessary. Regular cleaning and maintenance can also help prevent these issues.
An electric element is a metal part inside a kettle that makes the wate get hot
which electric element should be used so as to open the closed electric circuit
Valence electrons determine the reactivity of the element.
It will increase the current since the water heater is made of a heating element and which is resistive in nature. Ohms law states that V=IR where V is the voltage, I the current and R the resistance. Now the resistance will always remain constant. Thus, when the voltage is increased, the current will also increase.
Examples are the tungsten element inside a light bulb, and the heating element bars of an electric fire.
The identity of an element is determined by the number of protons.
Both electric skilles and electric cookers operate on the same type of cooking element but the utensil itself is different. However, a electric skillet is the same utensil as a skillet but uses the electric element to heat the food and the electric cooker is similar but it is more in the shape of a pan.
it is nothing but electrons of atoms of that element that connects the electric current.
To determine if an element is bad in a water heater, you can test for continuity using a multimeter. If there is no continuity, the element is likely bad and needs to be replaced.
To determine the oxidation number of an element in a chemical compound, you need to follow these steps: Identify the element in the compound. Determine the common oxidation states for that element. Assign the oxidation number based on the compound's overall charge and known rules for assigning oxidation numbers. By following these steps, you can accurately determine the oxidation number of an element in a chemical compound.