0
No. For an example using a 3500 watt element. The amperage through the element will be I = W/E, 3500/120 = 29 amps. The resistance of this 3500 watt element will be R = E/I, 120/29 = 4.13 ohms.
Now using the 200 volts and finding the amperage I = E/R, 200/4.13 = 48 amps. The new wattage of the element has become W = A x V, 48 x 200 = 9600 watts.
The element will not stand the increase in amperage and will burn open.
To operate on 200 volts and still have a 3500 element in the tank you will have to find an element with a resistance of 12 ohms. I = W/E, 3500/200 = 17 amps.
R = E/I = 200/17 = 12 ohms. This is a resistance three times more than the 120 volt element to achieve the 3500 watt rating.
What else can I help you with?
Can a 120 volt water heater work over a 14 gauge wire at 300 feet?
A 120-volt water heater should not be run over a 14-gauge wire at 300 feet. The voltage drop over such a long distance would be significant, potentially causing the water heater to not function properly or even become a safety hazard. It is recommended to use a larger gauge wire or locate the heater closer to the power source.
What size breaker for a 1500 watt 120 volt heater?
To calculate the breaker size for a 1500-watt 120-volt heater, use the formula: Breaker size = Power (Watts) / Volts. In this case, 1500 watts / 120 volts = 12.5 amps. Therefore, you would need a 15-amp breaker for a 1500-watt 120-volt heater to allow for a safety margin.
What size breaker for 120 volt 2500 watt water heater?
For a 2500 watt water heater operating at 120 volts, you would need a 20 amp breaker. This ensures the breaker can handle the load without tripping.
How many amps does a 750 watt 120 volt heater draw?
To find the current in amps that a 750 watt, 120 volt heater draws, you can use the formula: Amps = Watts / Volts. So, 750 watts divided by 120 volts equals 6.25 amps. Therefore, the heater draws approximately 6.25 amps.
What will happen if 120 volt appliance is plugged into 220 volt outlet explain with electrical equation?
If V is the rated voltage of the equipment, and Vs is voltage of the supply, we have this approximate equation: Vs = 2 V. That is enough to wreck the equipment and/or blow the fuse.120 volt appliance on 240 voltsThis senerio will use an electric baseboard heater but the results will be the same for any electrical appliance.The heater will operate over its given specified wattage. A 120 volt heater run off of 240 volt will have an output increase. Ohms law stated that current is directly proportional to the applied voltage and inversely proportional to the resistance of the circuit. A 240 volt heater can be run off of 120 volts but the wattage will be reduced.For example if an ordinary 1000 watt baseboard heater's supply is 120 volts, the current of the heater will be, I = W/E 1000/120 = 8.3 amps.The resistance of the heater is R = W/I (squared) =1000/8.3 x 8.3 (69) = 14.5 ohms.Applying 240 volts on the same heater whose resistance is 14.5 ohms results in a new heater wattage rating. W = E (squared)/R = 240 x 240 (57600)/14.5 = 3972 watts.This is 2972 watts, almost 300%, higher than the manufacturer's designed safety rating.The amperage drawn by connecting a 120 volt, 1000 watt heater to a 240 volt source will be, I = W/E = 3972/120 = 33 amps.W = watts, I = amperage, R = resistance in ohms and E = voltage.
Can i run a 240 volt water heater on 120 volt?
No. A water heater requires a 240 volt connection and cannot be re-wired to run on 120 volts. There isn't enough amperage in 120 volts to power the heating rods that are inside.
Can a 120 volt water heater work over a 14 gauge wire at 300 feet?
A 120-volt water heater should not be run over a 14-gauge wire at 300 feet. The voltage drop over such a long distance would be significant, potentially causing the water heater to not function properly or even become a safety hazard. It is recommended to use a larger gauge wire or locate the heater closer to the power source.
What size breaker for a 1500 watt 120 volt heater?
To calculate the breaker size for a 1500-watt 120-volt heater, use the formula: Breaker size = Power (Watts) / Volts. In this case, 1500 watts / 120 volts = 12.5 amps. Therefore, you would need a 15-amp breaker for a 1500-watt 120-volt heater to allow for a safety margin.
What size breaker for 120 volt 2500 watt water heater?
For a 2500 watt water heater operating at 120 volts, you would need a 20 amp breaker. This ensures the breaker can handle the load without tripping.
What will happen if 120 volt appliance is plugged into 220 volt outlet explain with electrical equation?
If V is the rated voltage of the equipment, and Vs is voltage of the supply, we have this approximate equation: Vs = 2 V. That is enough to wreck the equipment and/or blow the fuse.120 volt appliance on 240 voltsThis senerio will use an electric baseboard heater but the results will be the same for any electrical appliance.The heater will operate over its given specified wattage. A 120 volt heater run off of 240 volt will have an output increase. Ohms law stated that current is directly proportional to the applied voltage and inversely proportional to the resistance of the circuit. A 240 volt heater can be run off of 120 volts but the wattage will be reduced.For example if an ordinary 1000 watt baseboard heater's supply is 120 volts, the current of the heater will be, I = W/E 1000/120 = 8.3 amps.The resistance of the heater is R = W/I (squared) =1000/8.3 x 8.3 (69) = 14.5 ohms.Applying 240 volts on the same heater whose resistance is 14.5 ohms results in a new heater wattage rating. W = E (squared)/R = 240 x 240 (57600)/14.5 = 3972 watts.This is 2972 watts, almost 300%, higher than the manufacturer's designed safety rating.The amperage drawn by connecting a 120 volt, 1000 watt heater to a 240 volt source will be, I = W/E = 3972/120 = 33 amps.W = watts, I = amperage, R = resistance in ohms and E = voltage.
What current is taken by a heater with a resistance of 24 ohms when connected to 120 volt supply?
I don’t know
What amps or watts does a 120 volt diesel engineblock heater pull?
A typical 120 volt diesel engine block heater can pull around 1000-1500 watts, which would translate to approximately 8-12.5 amps. It's important to check the specifications of the specific block heater you are using to get an accurate measurement.
What are the recommended hot water heater settings for both the top and bottom elements to ensure optimal performance and efficiency?
The recommended hot water heater settings for the top and bottom elements are typically around 120 degrees Fahrenheit to ensure optimal performance and efficiency.
Can a 208 volt hot water heater be used with 110 volt with a 20 amp fuse?
Yes, but by using 120 volts on the 208 volt element you will only be able to obtain 1/4 of the rated wattage from the element not 1/2 like it seems you should.
What is the resistance of 450 watts 120 volt heater?
First find the current, I = W/E, 450/120 = 3.75 amps. R = E/I, 120/3.75 = 32 ohms.
How do you use 110 heater to 220 volts supply?
You don't. The heater will operate over its given specified wattage. A 120 volt heater run off of 240 volt will have an output increase. Ohms law stated that current is directly proportional to the applied voltage and inversely proportional to the resistance of the circuit. A 240 volt heater can be run off of 120 volts but the wattage will be reduced. For example if an ordinary 1000 watt baseboard heater's supply is 120 volts, the current of the heater will be, I = W/E 1000/120 = 8.3 amps. The resistance of the heater is R = W/I (squared) =1000/8.3 x 8.3 (69) = 14.5 ohms. Applying 240 volts on the same heater whose resistance is 14.5 ohms results in a new heater wattage rating. W = E (squared)/R = 240 x 240 (57600)/14.5 = 3972 watts. This is 2972 watts, almost 300%, higher than the manufacturer's designed safety rating. The amperage drawn by connecting a 120 volt, 1000 watt heater to a 240 volt source will be, I = W/E = 3972/120 = 33 amps. W = watts, I = amperage, R = resistance in ohms and E = voltage.
What is the recommended temperature to set a water heater?
The recommended temperature to set a water heater is 120 degrees Fahrenheit.
